Journal of Magnetics

  • 제5권3호
  • /
  • Pages.106-109
  • /
  • 2000
  • /
  • 1226-1750(pISSN)
  • /
  • 2233-6656(eISSN)
한국자기학회 (The Korean Magnetics Society)
권호 표지

Taguchi Parameter Design for the Fabrication Process of Anisotropic NdFeB Magnet by Single Stroke Hot Deformation

  • Ying Li (Korea Research Institute of Standards and Science, Chungnam National University) ;
  • Kim, Y. B. (Korea Research Institute of Standards and Science) ;
  • Wang, Lin-shan (Science College, Northeastern University) ;
  • Kim, M. J. (Korea Research Institute of Standards and Science, Chungnam National University) ;
  • M. S. Song (Korea Research Institute of Standards and Science, Chungnam National University) ;
  • J. H. Yang (Korea Research Institute of Standards and Science, Chungnam National University) ;
  • D. S. Suhr (Chungnam National University) ;
  • Kim, T. K (Chungnam National University) ;
  • Kim, C. O. (Chungnam National University)
  • 발행 : 2000.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The single stroke hot deformation is a simple method fur the fabrication of anisotropic NdFeB magnets. In order to obtain the optimum conditions, Taguchi method of experimental design was applied in this work. The optimum conditions obtained on the basis of coercivity in Taguchi analysis was a little different from those of remanence and maximum energy Product. The contribution of each factor to magnetic Properties was calculated in detail.

키워드

참고문헌

  1. United Stated Patent
  2. J. Appl. Phys v.83 S. Guruswamy;Y. R. Wang;V. Panchanathan
  3. J. Phys. D:Appl. Phys v.31 O. Gutflesch;A Kirchner
  4. J. Appl. Phys v.81 Y. R. Wang;S. Guruswamy;V. Panchanathan
  5. Appl. Phys Lett v.44 J. J. Croat;J. F. Herbst;R. W. Lee;F. E. Pinkerton
  6. J. Appl. Phys. v.69 Y. Yoshida;Y. Kasai;T. Watanabe;S. Shibata;V. Panchanathan;J. J. Croat
  7. A primer on the Taguchi Method Ranjit K. Roy
  8. v.1 Proceedings of the 2nd Annual International Conference on Industrial Engineering Applications and Practice Ⅱ Sornkrit Rungroekrit
  9. v.86-87 Surface & Coatings Technology P. J. Kellym;R. D. Arnell
  10. Proceeding of the 14th International Conference on CAD/CAM, Robotics and Factories of the Future V. N. Gaitonde