단순 급수관로에서의 워터 햄머 현상에 관한 연구

The Experimental Study of Water Hammer by Valve Closure in Water Supply Piping System

  • 발행 : 2000.07.01

초록

This study is to investigate the pressure wave characteristics and the maximum pressure rise generated by instantaneous valve closure at the end of the straightening copper piping system. Experiments were conducted under the following conditions : initial pressure 1~5 bar, flow velocity 0.6~3.0 m/s and water temperature $20^{\circ}C$ . Results indicated that the peak pressure generated by quick valve closure reached Joukowsky's value. And we also found that the maximum pressure rise and the pressure history were depended on not only closing time but also flow velocity.

키워드

참고문헌

  1. ASSE 1995 E. J. Zimmer Technical Seminar Water hammer control Ballanco
  2. American Society of Mechanical Engineers. Water hammer arresters(ANSI A112.26.1-1969 (R1975)
  3. Journal of Air-Conditioning and Refrigeration v.5 Effects of waterhammer arresters and air chambers in a simple water piping system of buildings Han, H. T.;Kim, J. M.
  4. Transactions of the society of heating no.4 A stydy on water hammer and prevention in water supply piping system of building Noriyuk Takahashii;Fumitoshi, Kiya
  5. Proceedings of the society of heating A fundamental study of the water hammering in hot water supply pipes Kuwahara Takumi(et al.)
  6. Report of KICT Development of optimum facility system for high-rise apartment(Ⅱ) Kim, J. P.
  7. refrigeration and sanitary Engineering-plumbing fire protection environmental health Handbook of air-conditioning SAREK
  8. Journal of the society of heating v.56 no.9 A study on prevention of water hammer in water supply piping system of building Takahashi, Noriyuki
  9. The society of heating HASS 212 SHASE
  10. Faucets