액정법을 이용한 휜-관 열교환기 휜의 열적 특성에 관한 연구

A Study on the Thermal Characteristics of Finned-tube Heat Exchanger by Using the Liquid Crystal Technique

  • 강희찬 (군산대학교 기계공학부) ;
  • 김무환 (포항공과대학교 기계공학과) ;
  • 김명수 (군산대학교 전자정보공학부)
  • 발행 : 2000.04.01

초록

This study was discussed about the thermal characteristics of finned tube heat exchanger having two row used in the air-conditioning application. Pressure drop and heat transfer coefficient were measured and investigated for the 3 times models of plain fin. Also the temperature distribution and heat conduction in the fin was measured by using the liquid crystal method. The surface temperature of rear row was nearly constant, and heat conduction in the fin was stronger near the front row than the rear row.

키워드

참고문헌

  1. Energy Technology Air-side heat transfer and flow friction: theoretical aspects, in recent development in finned tube heat exchangers Baggio, P.;Fornasicri, E.;Ch. Marvillet(ed.)
  2. ASHRAE Trans. v.93 no.Part 2 Effect of fin pattern on the air-side heat transfer coefficient in plate finned-tube heat exchangers Beecher, D.T.;Fagan, T.J.
  3. J. of Heat Transfer v.98 Experiments on the transfer characteristics of a corrugated fin and tube heat exchanger configuration Goldstein, L. Jr.;Sparrow, E.M.
  4. Hitachi Review v.26 Development of high efficiency air-cooled heat exchanger Ito, M.;Kimura, H.;Senshu, T.
  5. ASHRAE Trans. v.95 no.Part 1 Improved heat transfer performance of air coolers by strip fins controlling air flow distribution Hatada, T.;Ueda, U.;Oouchi, T.;Shimitz, T.
  6. KSME J. v.7 An experimental study on the flow and heat transfer characteristics of an impinging jet Kim, K.S.
  7. Proceedings, ASME Gas turbine and Aeroengine Congress v.90-GT-25 Local heat transfer in turbine disk-cavities Bunker, R.S.;Metzger, D.E.;Witting, S.
  8. ASME J. Turbomachinery v.114 A new hue capturing technique for the quantitative interpretation of liquid crystal images used in convective heat transfer studies Camci, C.;Kim, K.;Hippensteele, S. A.
  9. Transactions of the KSME v.21 no.1 A Large scale model test to investigate the pressure drop and heat transfer characteristics in the air side of two-row heat exchanger Hie Chan Kang;Moo Hwan Kim
  10. Proceeding of SAREK Summer Annual Conference Thermohydraulic characteristics of mult-row plane finned-tube heat exchanger for air-conditioner Hie, Chan Kang;Moo Hwan Kim
  11. Low speed wind tunnel testing Rae, Jr.;W.H.;Pope, A.
  12. Proceedings, ASME Heat transfer and friction correlations for plate finned tube heat exchangers having plane fins Gray, D.L.;Webb, R.L.
  13. Experimental Heat Transfer v.9 Heat Transfer and Friction Characteristics of Convex-Louver Fin-and-Tube Heat Exchanger Wang, C.C.;Chen, P.Y.;Jang, J.Y.