References
- Machining Impossible Shapes Five-axis control sculptured surface machining using conicoid end mill Morishige, K.;Nasu, T.;Takeuchi, Y.;G.J. Olling(et al.)
- 한국정밀공학회지 v.10 no.1 자유곡면의 5축 NC가공을 위한 CAM 시스템 개발 전차수;박세형;전용태
- Sculptured Surface Machining Choi, B.K.;Jerard, R.B.
- 대한기계학회논문집 v.17 no.8 5축 CNC 밀링으로의 자유곡면 가공에 관한 연구(Ⅰ) 조현덕;전용태;양민양
- Ph.D. Thesis Five-axis NC machining of compound sculptured surfaces Hwang, J.S.
- 박사학위논문 금형의 5축 NC 가공을 위한 CAM 시스템 개발에 관한 연구 박정환
- 대한기계학회 생산 및 설계공학부문 학술강연회 강연집 5축 연마기를 위한 전용 CAM 시스템 차경덕;김동수;전차수;조규갑;이민철
- The International Journal of Advanced Manufacturing Technology v.13 no.6 Collision Free Tool Path Generation Using 2-Dimensional C-Space for 5-Axis Control Machining Morishige, K.;Kase, K.;Takeuchi, Y.
- 석사학위논문 5축 NC가공에서의 공구자세 최적화 차경덕
- Computer-Aided Design v.26 no.3 5-axis machining of sculptured surfaces with a flat-end cutter Li, S.X.;Jerard, R.
- Computer-Aided Design v.27 no.10 2-Phase approach to global tool interference avoidance in 5-axis machining Lee, Y.S.;Chang, T.C.
- Annals of the CIRP v.41 Generation of 5-Axis Control Collision-Free Tool Path and Postprocessing for NC Data Takeuchi, Y.;Watanabe, T.
- Annals of the CIRP v.40 5-Axis Control Machining and Grinding Based on Solid Model Takeuchi, Y.;Idemura, T.
- Computer-Aided Design v.25 no.6 Cutter-location data optimization in 5-axis surface machining Choi, B.K.;Park, J.W.;Jun, C.S.
- Journal of Design and Manufacturing v.3 Accurate tool placement and orientation for finish surface machining Jensen, C.G.;Anderson, D.C.
- 한국정밀공학회 추계학술대회 논문집 포텐셜 에너지를 이용한 5축 NC 밀링의 공구방향 결정 조인행;이건우
- INT. J. PROD. RES. v.35 no.1 Surface interrogation and machining strip evaluation for 5-axis CNC die and mold machining Lee, Y.S.;Ji, H.
- Computer-Aided Design v.30 no.7 Non-isoparametric tool path planning by machining strip evaluation for 5-axis sculptured surface machining Lee, Y.S.
- Machining Impossible Shapes Curvature Matched Machining Methods Versus Commercial CAD Methods White, K.A.;Hill, J.K.;Jensen, C.G.;G.J.Olling(et al.)
- Robots and manufacturing automation Asfahl, C.R.
- 석사학위논문 위상정보를 이용한 다면체 모델의 NC가공 경로 생성 김동수
- 한국 CAD/CAM 학회 논문집 v.4 no.2 Heel angle 조정에 의한 터빈 블레이드의 5축 NC가공 데이터 생성 이철수;박광렬