DOI QR코드

DOI QR Code

Fe-6.5wt% Si 합금의 역학 특성에 미치는 어닐링 효과

Effect of Annealing on the Mechanical properties of Fe-6.5wt% Si Alloy

  • 발행 : 2000.12.01

초록

6.5wt% Si steel is widely known as an excellent magnetic material because its magnetostriction is nearly zero. The AX magnetic properties as magnetostriction of 6.5% Si steel were evaluated and compared with those of conventional 3% Si steel sheet. In this paper, the fracture behavior of the poly crystals and single crystals of Fe-6.5wt%Si alloy has been observed. Single crystals were prepared by Floating Zone(FZ) method, which melts the alloy by the use of high temperature electron beam in pure argon gas condition. And the single crystals were annealed at 500$^{\circ}C$ and 700$^{\circ}C$ respectively and tensile tested at room temperature. According to the result, B2 phase has more good elongation than DO$_3$ phase. It was also found that the fracture surfaces of the single crystals have hairline facets in same direction, and the facets change the direction according to the single crystal phase.

키워드

참고문헌

  1. Arai, K. I., Tsuya, N., and Ohmori, K., 1981, 'Annealing of Silicon-Iron Ribbons Containing Around 6.5wt% Silicon,' IEEE Trans. Magn, Vol. MAG-17, No. 6, pp. 3154-3156
  2. Tanaka, Y., Takada, Y., Abe, M. and Masuda, S., 1987, 'Magnetic Properties of 6.5% Si-Fe Sheet and Its Applications,' J. Magn. Magn. Mater., Vol. 83, pp. 375-376 https://doi.org/10.1016/0304-8853(90)90553-3
  3. Ninomiya, H., Tanaka, Y., Hiura, A. and Takada, Y., 1991, 'Magnetostriction and Applications of 6.5%Si Steel Sheet,' J. Appl. Phys., Vol. 69, No. 8, pp. 5358-5360 https://doi.org/10.1063/1.348028
  4. Namikawa, M., Ninomiya, H., Tanaka, Y., and Takada, Y., 1998, 'Magnetic Properties of 6.5% Silicon Steel Sheets Under PWM Voltage Excitation,' IEEE Trans. Magn., Vol. 34, No. 4, pp. 1183-1185 https://doi.org/10.1109/20.706469
  5. Matilda Goetz, 1951, 'Iron Silicon Alloys Heat Treated in a Magnetic Field,' J. Appl. Phys., Vol. 22, No. 7, pp. 964-965 https://doi.org/10.1063/1.1700079
  6. Kenji Narita and Masato Enokizono, 1979, 'Effect of Ordering on Magnetic Properties of 6.5Percent Silicon-IRon Alloy,' IEEE Trans. Magn, Vol. MAG-15, No. 1, pp. 911-915
  7. Takada, Y., Abe, M., Masuda, S., and Inagaki, J., 1988, 'Commercial Scale Production of Fe-6.5 wt%Si Sheet and Its Magnetic Properties,' J. Appl. Phys., Vol. 64, No. 10, pp. 5367-5369 https://doi.org/10.1063/1.342373
  8. Arai, K. I., Satoh, H., Agatsuma, S. and Ishiyama, K., 1990, 'Tertiary Recrystallization and Iron Loss of Ultra Thin Silicon Steels,' IEEE Trans. Magn., Vol. 26, No. 5, pp. 1969-1971 https://doi.org/10.1109/20.104585
  9. Narita, K., and Enokizono, M., 1978, 'Effect of Nickel and Manganese Addition on Ductility and Magnetic Properties of 6.5% Silicon-Iron Alloy,' IEEE Trans. Magn., MAG-14, No. 4, pp. 258-262
  10. Cai, B. C., Dasgupta, A., and Chou, Y. T., 1982, 'A New Technique for The Growth of Bicrystals of Refractory Metals,' J. Less-Common Met., Vol. 86, pp. 145-151 https://doi.org/10.1016/0022-5088(82)90199-0
  11. Glebovsky, V. G., Moskvin , S. I., and Semenov, V. N., 1982, 'Growing Techniques and Structure of Noibium Bicrystals,' J. Crystal Growth, Vol. 59, pp. 450-454 https://doi.org/10.1016/0022-0248(82)90366-9
  12. Semenov, V. N., Staumal, B. B., Glebovsky, V. G. and Gust, W., 1995, 'Preparation of Fe-Si Single Crystals and Bicrystals for Diffusion Experiments by the Electron Beam Floating Zone Technique,' J. Crystals Growth, Vol. 151, pp. 180-186 https://doi.org/10.1016/0022-0248(95)00034-8
  13. Kadeckova, S., and Sestak, B., 1963, 'Stabilization of Floation Liquid Zone in Preparation of Fe-si Alloy Single Crystals,' Brit. J. Appl. Phys., Vol. 14, pp. 927-928 https://doi.org/10.1088/0508-3443/14/12/327
  14. Kim, W. Y., Hanada, S., and Takasugi, T., 1998, 'Large Tensile Elongation Behavior of Fe-14 at % Si Single Crystal,' Acta mater. Vol. 46, No. 16, pp. 5701-5713 https://doi.org/10.1016/S1359-6454(98)00251-1
  15. Kubaschewski, O., 1982, 'Iron Phase Diagrams,' pp. 136-139, Springer, Berlin
  16. Pittinato, G. F., Kerlins, V., Phillips, A., and Russo, M. A., 1975, 'SEM/TEM Fractography Handbook,' pp. 25-57, Metals and Ceramics Information Center, USA
  17. 小寺澤 良一, 1982, '金屬 破斷面 寫眞集,' pp. 503-505, テクノアイ, 東京
  18. Hertzberg, R. W., 1996, 'Deformation and Fracture Mechanics of Engineering Materials,' pp. 121-123, Wiley & Sons, New York
  19. Lynch, S. P., 1986, 'Herringbone Patterns on Fracture Surface,' Scripta Metal., Vol. 20, pp. 1067-1072 https://doi.org/10.1016/0036-9748(86)90438-2