DOI QR코드

DOI QR Code

오리피스를 이용한 유압 액추에이터의 충격치 제어특성에 관한 실험적 연구

An Experimental Study on the Control of Shock in the Hydraulic Actuator System Using the Orifice

  • 발행 : 2000.11.01

초록

Control of shock may be important in the hydraulic system and necessary to avoid failure and to improve the efficiency of operation. This study addresses the design and use of an orifice to provide the desired control of the hydraulic actuator system. The experimental apparatus is an idealization of an automobile shift system. Control is accomplished by installing three different types of orifices at appropriate locations in the system. Experimental results show that the orifice can be used to obtain the control of shock and control level depends on the orifice size, orifice type, operating pressure and flow rate.

키워드

참고문헌

  1. Wylie, E. B. and Streeter, V. L., 1993, Fluid Transient in Systems, Prentice Hall
  2. Moody, F. J., 1990, Instruction to Unsteady Thermofluid Mechanics, John Wiley & Sons
  3. Wiggert, D. C. and Sundquist, M. J., 1979, 'The Effect of Gaseous Cavitation on Fluid Transients,' J. Fluids Engineering, ASME Transactions, Vol. 101, pp. 79-86
  4. Moody, F. J., 1973, 'Time-Dependent Pipe Forces Caused by Blowdown and Flow Stoppage,' J. Fluids Engineering, ASME Transactions, Vol. 95, pp. 422-428
  5. Wright, S. J., Wylie, E. B. and Taplin, L. B., 1983, 'Matched Impendence to Control Fluid Transients,' J. Fluids Engineering, ASME Transactions, Vol. 105, pp. 219-224
  6. Idelchik, I. E., 1994, 'Handbook of Hydraulic Resistance,' CRC Press, Inc., pp. 208-235
  7. Hydro Technik, 1995, 'Operation Manual Measuring Instruments,' Hydro Technik
  8. 小栗幸正, 1979, '油壓と回路,' 理工學社, pp. 13-17
  9. 汁 茂, 1998, '油壓裝置設計の實際,' たいが出版, pp. 41-50
  10. 田中欲久, 1991, '油壓のディジタル制御と應用,' 近代圖書, pp. 43-66
  11. Goodwin, A. B., 1976, 'Fluid Power Systems,' Macmillan Press Ltd., pp. 78-112
  12. Vockroth, R. W., 1994, 'Industrial Hydraulics,' Delmar Publishers Inc., pp. 43-60
  13. Henke, R. W., 1986, 'Fluid Power Systems & Circuits,' Penton Publishing, Inc., pp. 7-31