Journal of Ocean Engineering and Technology (한국해양공학회지)

Korean Society of Ocean Engineers (한국해양공학회)
권호 표지

Effect of Specimen Size on Fatigue crack Growth Rate in Steels

강재의 피로균열전파율에 미치는 시험편 크기의 영향

  • 안석화 (부경대학교 기계공학부)
  • Published : 2000.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes the effect of specimen size on fatigue crack growth rate for the offshore structural high-tensile-strength steel BS4360 and machine structural steel SM45C. The purpose of the present study is to investigate the effect of stress ratio aspect ratio specimen width and specimen thickness of the fatigue crack growth behavior. Compact tension specimens with a LT orientation for BS4360 and SM45C steels were used, All testing was done at constant stress intensity factor range controlled fatigue crack growth condition. The investigation demonstrates that the fatigue crack growth rate is increased with increasing stress ratio and specimen thickness and is decreased with increasing specimen width. The fatigue crack growth rate is unaffected by aspect ratio until a/W=0.50 but is increased by increasing spect ratio from a/W=0.55.

Keywords

References

  1. 대한기계학회 94년도 재료 및 파괴부문 학술대회논문집 피로균열전파저항에 미치는 시험편 두께의 영향에 관한 신뢰성공학적 고찰 김선진
  2. 대한기계학회논문집 v.23 no.7 피로균열전파저항의 변동성에 의한 균열전파율의 해석 김선진
  3. 대한기계학회논문집 v.22 no.8 두께변화에 따른 피로균열진전의 변동성에 대한 확률론적 해석 심동석;김정규
  4. 대한기계학회논문집 v.16 no.9 균일진폭하중하에서의 확률론적 균열진전 수명해석 윤한용;양영순;윤장호
  5. International J. of Fracture v.14 no.5 Review and Extension of Compliance Information for Common Crack Growth Specimens Ashok Saxena;Hudak, S. J.
  6. J. of Basic Engineering v.89 Numerical Analysis of Crack Propagation in Cyclic Loaded Structures Forman, R. G.;Keary, V. E.;Engle, R. M.
  7. Bull. Japan Soc. Mech. Engineers v.25 Effect of Specimen Thickness on Fatigue Crack Propagation in High Strength Steels Fujitani, K.;Sakai, T.;Nakagawa, A.;Tanaka, T.
  8. Sov. Mat. Sci. v.17 Relationship of Fatigue Crack Growth Rate in St3 Sp Steel to the Dimension and Orientation of the Sample Georgiev, M. N.;Dagadushkin, V.Yu;Minaev, V. N.;Stork, L. P.
  9. Engineering Fracture mechanics v.29 Time Series Analysis of Fatigue Crack Growth Rate Data Ortiz, K.;Kiremidjian, A. S.
  10. J. of Basic Engineering v.85 A Critical Analysis of Crack Propagation Laws Paris, P. C.;Erdogan, F.
  11. Engineering Fracture Mechanics v.22 no.2 Effect of Specimen Size on Fatigue Crack Growth Rate n AISI 4340 Steel Putatunda, S. K.;Rigsbee, J. M.
  12. Eng. Fract. Mech. v.4 The Influence of Stress Intensity and Microstructure on Fatigue Crack Propagation in Ferritic Materials Richard, C. E.;Lindley, T. C.
  13. Metal Science v.9 Effects of Thickness on Fibrous Fracture from a North and on Fatigue Crack Propagation in low Strength Steel Ritchie, R. O.;Smith, R. F.;Knott, J. F.
  14. ASTM STP 462 The Effect of Stress Ratio During Crack Propagation and Fatigue for 2024-T3 and 7075-T6 Aluminum Warker, E. K.
  15. 村料 v.36 no.408 疲勞キ裂전ぱ速度の試驗片內變動と試驗片間變動の分離 市川昌弘;中村武夫