한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제17권9호
  • /
  • Pages.181-188
  • /
  • 2000
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

팩인홀 작업을 효율적으로 수행하기 위한 컴플라이언스 해석

Compliance Analysis for Effective Peg-In-Hole Task

  • 발행 : 2000.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper deals with an analysis of the compliance characteristic for effective peg-in-hole task using robot hand without inter-finger coupling. We first observe the fact that some of coupling stiffness elements cannot be planned arbitrary. next we classify the task of inserting a peg-in-a-hole into two contact styles between the peg and the hole. Then we analyze the conditions of the specified stiffness matrix in the operational space to successfully and more effectively achieve the give peg-in-hole task for each case. It is concluded that the location of compliance center on the peg and the coupling stiffness element existing between the translational and the rotational direction play important roles for successful peg-in-hole task. Simulation results are included to verify the feasibility of the analytic results.

키워드

참고문헌

  1. T. Yoshikawa, and X.-Z. Zheng, 'Coordinated dynamic hybrid position/force control for multiple robot manipulators handling one constrained object,' Int. Jour. of Robotics Research, Vol. 12, No. 3, pp. 219-230,1993 https://doi.org/10.1177/027836499301200302
  2. T. Hasegawa, T. Matsuoka, T. Kiriki, and K, Honda, 'Manipulation of an object by a multi-fingered hand with multi-sensors,' Proc. of Int. Conf. on Industrial Electronics, Control, and Instrumentation, pp. 174-179, 1996 https://doi.org/10.1109/IECON.1996.570948
  3. H. Maekawa, K. Tanie, and K. Komoria, 'Dynamic Grasping Force Control Using Tactile Feedback for Grasp of Multifingered Hand,' Proc. of IEEE Int. Conf. on Robotics and Automation, pp. 2462-2469, April 1996 https://doi.org/10.1109/ROBOT.1996.506533
  4. V. Nguyen, 'Constructing Force-Closure Grasps in 3D,' Proc. of IEEE Int. Conf. on Robotics and Automation, pp. 240-245, March 1987
  5. K. Yokoi, M. Kaneko, and K. Tanie, 'A Compliance Control Method Suggested by Muscle Networks In Human Arms,' Proc. of IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, pp. 385-390, 1988
  6. M. R. Cutkosky, and I. Kao, 'Computing and controlling the compliance of a robotic hand,' IEEE Trans. on Robotics and Automation, Vol. 5, No.2, pp. 151-165,1989 https://doi.org/10.1109/70.88036
  7. Y. T. Lee, H. -R Choi, W. K. Chung, and Y. Youm, 'Stiffness Control of a Coupled Tendon-Driven Robot Hand,' IEEE Control Systems Magazine, Vol. 14, No. 5, pp. 10-19, Oct. 1994 https://doi.org/10.1109/37.320882
  8. B. -H. Kim, B. -J. Yi, I. H. Suh, and S. -R. Oh, 'A Biomimetic Compliance Control of Robot Hand by Considering Structures of Human Finger,' Proc. Of IEEE Int. Conf. on Robotics and Automation, pp. 3880-3887,2000 https://doi.org/10.1109/ROBOT.2000.845336
  9. D. E. Whitney, 'Quasi-Static Assembly of Compliantly Supported Rigid Parts,' Jour. of Dynamic systems, Measurement, and control, Vol. 104, pp. 65-77, March 1982
  10. H. Asada, Y. Kakumoto, 'The Dynamic Analysis and Design of a High-Speed Insertion Hand Using the Generalized Centroid and Virtual Mass,' Jour. of Dynamic systems, Measurement, and control, Vol. 112, pp. 646-652, 1990
  11. T. Matsuoka, T. Hasegawa, T. Kiriki, and K, Honda, 'Mechanical Assembly based on Motion Primitives of Multi-fingered Hand,' Proc. of Advanced Intelligent Mechatronics, 1997 https://doi.org/10.1109/AIM.1997.652943
  12. K. B. Shimoga and A. A. Goldenberg, 'Grasp Admittance Center: Choosing Admittance Center Parameters,' Proc. of American Control Conference, pp. 2527-2532, 1991 https://doi.org/10.1109/ACC.1991.4174862
  13. B. -J. Yi, I. H. Suh, and S. -R. Oh, 'Analysis of a five-bar finger mechanism having redundant actuators with applications to stiffness and frequency modulation,' Proc. of IEEE Int. Conf. on Robotics and Automation, pp. 759-765, 1997 https://doi.org/10.1109/ROBOT.1997.620126