Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Evaluation of Module Degree Considering Assembly and Disassembly

조립과 분리를 고려한 제품의 모듈정도 평가

  • Mok, Hak-Soo (Mechanical Technology Research Center, Dept.of Industry Engineering, Busan National University) ;
  • Yang, Tae-Il (Mechanical Technology Research Center, Dept.of Industry Engineering, Busan National University) ;
  • Hwang, Hoon (Mechanical Technology Research Center, Dept.of Industry Engineering, Busan National University)
  • 목학수 (부산대학교 산업공학과 기계기술 연구소) ;
  • 양태일 (부산대학교 산업공학과 기계기술 연구소) ;
  • 황훈 (부산대학교 산업공학과 기계기술 연구소)
  • Published : 2000.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper module of a product is determined by the characteristics of a product itself and process. To analyze the characteristics of the product information on subassemblies and parts can be obtained by analyzing the existing product. Based on the analysis of characteristics of product structure and function determination rules of a module degree could be proposed for assembly and disassembly process and product structure and function. By applying these rules of a module, module of a product is classified into full half and non-module depending on the module degree of a product. As a result of module degree analysis simpler assembly process and reduced structural interference can be realized. For the product function simpler updated and multi function can be also achieved.

Keywords

References

  1. Sohlenius, G., 'Concurrent Engineering,' Annals of the CIRP Keynote Paper, Vol. 41, No. 2, 1992
  2. Pahl, G. and Beitz, W., 'Engineering design, a Systematic approach, Springer-Verlag,' New York, 1991
  3. Fey, V.R., Rivin, E. and Vertkin, I.M., 'Application of the theory of inventive problem solving to design and manufacturing systems,' Annals of CIRP. Vol. 41, No. 2, p. 645, 1994
  4. Hillstrom, F., 'Applying Axiomatic design to interface analysis in modular product development,' Advances in Design Automation, ASME, DE-Vol. 69-2, p. 363, 1994
  5. Erixon, G., Von Yxkull, A. and Arnstrom, A., 'Modularity : the basis for product and factory reengineering,' Annals of CIRP, Vol. 45, No. 1, p. 1, 1996 https://doi.org/10.1016/S0007-8506(07)63058-3
  6. 목학수, 양태일, '조립합리화를 위한 제품 모듈화의 결정 요소,' 한국정밀공학회지, 제15권 제8호, p. 88-101, 1998
  7. Robert, O. and Parmley, P.E., 'Standard Handbook of Fastening and Joining,' McGraw-Hill, Inc., 1989
  8. Boothroyd, G., 'Design for Assembly,' Boothroyd Dewhurst, Inc., 1994
  9. N. N. 현대자동차주식회사, '엑셀 자동차 부품 카타로그,' 1992
  10. Ulrich, K. T. and Eppinger, S. D., 'Product Design and Development,' McGraw-Hill Publications, Inc., 1995
  11. Alan, R. and Jan, C., 'Design of Assembly,' McGraw-Hill Publications, Inc., 1994
  12. Warnecke, H. J. and Kroll, L., 'Design for Assembly-part of the Design process,' Annals of CIRP, Vol. 37, No. 1, 1988
  13. Zussman, E. and Kriwet, G., 'Disassembly-oriented Assessment Methodology to support Design for Recycling,' Annals of the CIRP, Vol. 43, No. 1, 1994
  14. Ehud, K., Brent, B. and Antony, P., 'A methodology to evaluate ease of disassembly for product recycling,' IIE Transaction, Vol. 28, No. 1, p. 837-845, 1996
  15. Russel, R. B., Youngsup, J. and Inyong, H., 'Feedback of manufacturing Experience for DFM Design Rules,' Annals of the CIRP, Vol. 45, No. 1, 1996 https://doi.org/10.1016/S0007-8506(07)63028-5