초록
본 논문은 T-모양 급전션을 갖는 마이크로스트립 슬롯 안테나를 전송선로 모델로 해석을 하였다. 마이크로스 트립 선로와 슬롯 선로의 접합변을 트랜스포머로 모델링을 하였으며 실험적인 방법으로 트랜스포머의 turn ratio 를 유도하였다. 전송선로 모델을 이용하여 단일 안테나뿐만 아니라 $1\times2,l\times4$ 배열 안테나를 해석하여 설계하 였고 제착하여 전송선로 모델로 계산한 반사손실 값과 측정값의 비교를 통해 전송선로 모텔이 안테나 설계에 유 용함을 입증하였다. 측정한 단일 안테나, $1\times2,l\times4$배열 안테나의 대역폭은 VSWR $\leq2$를 기준으로 하여 각각 2 28.5%, 47.8% 50.9% 였고 $1\times4$배열 안테나의 E-명변에서 주빔의 3dB 빔폭은 약$27^{\circ}$ 이득은 7.97 dBi 였다.
A T-shaped microstripline -fed printed slot antenna is anlayzed by using the transmission line model(TLM) in this paper. Microstrip-slotline junction is modeled by employing a transformer and the transformer turn ratio is derived empirically. The method is extended to the case of $1\times2,l\times4$array antennas. Return loss results obtained by using the transmission line model. The maximum measured results and demonstrated the usefulness of the transmission line model. The maximum bandwidths of a single antenna, $1\times2,l\times4$ array antennas are 28.5%, 47.8%, and 50.9%, respectively, for the VSWR$\leq2$. The gain of $1\times4$ array antenna is 7.97dBi and the beamwidth is about $27^{\circ}$.