차량 안정성 향상을 위한 제어기 설계

Design of Control Logics for Improving Vehicle Dynamic Stability

  • 허승진 (회원, 국민대학교 자동차공학대학원) ;
  • 박기홍 (회원, 국민대학교 자동차공학대학원) ;
  • 이경수 (회원, 한양대학교 기계공학부) ;
  • 나혁민 (회원, 국민대학교 자동차공학대학원) ;
  • 백인호 (회원, 국민대학교 자동차공학대학원)
  • 발행 : 2000.09.01

초록

The VDC(Vehicle Dynamic Control) is a control system whose target is to improve stability of a vehicle under lateral motion. A lateral vehicle motion, especially on a slippery road, can lead to a hazardous situation, and the situation can even worsen by the driver`s inappropriate response. In this paper, two VDC systems, a fuzzy-based controller and an LQR-based controller have been developed. The controllers take as input the yaw rate and the sideslip angle of either body or rear wheel, and they yield the direct yaw moment signal by which the vehicle can gain stability during cornering. Simulations have been conducted to evaluate the performance of the control system. The results indicated that the controllers can successfully improve vehicle stability under potentially dangerous driving conditions.

키워드

참고문헌

  1. 한국자동차공학회 논문지 차량 동역학 제어기를 위한 노면 마찰계수 및 차체 미끄럼각 추정기 설계 박기홍, 허승진, 백인호, 이경수
  2. Proceedings of AVEC 1996 Control Aspects of the Bosch-VDC A.V. Zanten(et al.)
  3. Proceedings of AVEC 1998 Evaluation of a Direct Yaw Moment Control Algorithm by Brake Hardware-in-the-Loop Simulation J. Ryu, J.S. Lee;H. Kim
  4. Proceedings of AVEC 1998 Application of Sliding-mode Control to Control Vehicle Stability T. Yoshioka, T. Adachi,;T. Butsuen
  5. Vehicle System Dynamics v.27 Integrated Control of Active Rear Wheel Steering and Direct Yaw Moment Control M. Nagai, Y. Hirano,;S. Yamanaka
  6. Toyota Motor Technical Report Unified Theory of Anti-Spin and Anti-plough Control with Targer Rear-wheel Slip Angle F. Yosiki