초록
표면 탄성과 디바이스의 전극재료로 사용되는 Al-%Cu(4000$\AA$)/tungsten nitride 박막을 magnetron sputtering 법으로 제조하고 전기저항을 평가한 비정질상의 tungsten nitride 박막을 제조할 수 있었고, 비정질 형성을 위해 질소비(R =$N_2$/(Ar+$N_2$)가 10~40% 정도 필요하다. Tungsten nitride 박막의 잔류응력은 비정질이 형성되면서 급격히 감소되었다. 이러한 비정질 박막위에 Al-1%Cu 합금막이 형성되었다. 다층막은 453K에서 4시간 동안 열처리함으로써 $3.6{\mu}{\Omega}-cm$의 저항을 나타냈는데, 이는 박막내 결정립 성장과 결함의 감소에 기인하였다.
As a power durable-electrode in SAW filter, Al-1%Cu/tungsten nitride multi-layer thin film was fabricated by magnetron sputtering process. Tungsten nitride films had the amorphous phase at the nitrogen ratio, R, ranging from 10~40%. The amorphization could be controlled by nitrogen ratio, R= $N_2$/($N_2$+Ar) as a sputtering process parameter. Residual stress in tungsten nitride abruptly decreased with the formation of amorphous phase. Al-1%Cu thin film was deposited on the amorphous tungsten nitride. After the multi-layed thin film was annealed for 4 hours at 453K, the resistivity decreased as $3.6{\mu}{\Omega}-cm$, which was due to grain growth reduced crystal defects.