주파수 응답함수를 이용한 구조물 고유진동수 극대화를 위한 최적 지지점 선정

Selection of Optimal Supporting Position to Maximize Natural Frequency of the Structure Using Frequency Response Function

  • 박용화 (한국표준과학연구원 음향진동 연구실) ;
  • 정완섭 (한국표준과학연구원 음향진동 연구실) ;
  • 박윤식 (한국과학기술원 기계공학과)
  • 발행 : 2000.08.01

초록

A procedure to determine the realizable optimal positions of rigid supports is suggested to get a maximum fundamental natural frequency. a measured frequency response function based substructure-coupling technique is used to model the supported structure. The optimization procedure carries out the eigenvalue sensitivity analysis with respect to the stiffness of supports. As a result of such stiffness optimization, the optimal rigid-support positions are shown to be determined by choosing the position of the largest stiffness. The optimally determined support conditions are verified to satisfy the eigenvalue limit theorem. To demonstrate the effectiveness of the proposed method, the optimal support positions of a plate model are investigated. Experimental results indicate that the proposed method can effectively find out the optimal support conditions of the structure just based on the measured frequency response functions without any use of numerical model of the structure.

키워드

참고문헌

  1. ASME Trans. Journal of Applied Mechanics On Some General Properties of Combined Dynamical Systems Dowell,E.H.
  2. Finite Elements in Analysis and Design v.3 Theory of Application of Dynamic Decoupling in Structural Analysis:Another View Dowell. E. H.
  3. ASME Trans. Journal of Applied Mechanics Free Vibrations of An Linear Structure with Arbitrary Support Conditions Dowell.E.W.
  4. Journal of Sound and Vibration v.102 The Effect of Point constraints on Transverse Vibration of Cantilever Plates Narita.Y.
  5. Journal of Sound and Vibration v.174 Effects of Arbitrarily Distributed Elastic Point constraints on Vibration and Behavior of Rectangular Plates Liew.K.M.;Lam.K.Y.
  6. Computer Methods in Applied Mechanics and Engineering v.19 Optimal Design of Vibrating Beams with Unspecified Support Reactions Szelag,D.;Mroz,M.
  7. Journal of Sound and Vibration v.120 Minimum Stiffness of Optimally Located Supports for Maximum Value of Beam Eigenfrequencies Akesson,B.;Olhoff,N.
  8. ASME Trans. Journal of Vibration and Acoustics v.114 A Simple Technique for the Rapid Estimation of the Optimal Support Locations for a Vibrating Plate Pitattesi,J.M.;Kunz.R.J.
  9. Electric Packaging v.115 A Design Approach for the Systematic Improvement for Support Locations for Vibrating Circuit Card Pitattesi,J.M.;Di Edwardo,A.V.
  10. Journal of Sound and Vilbration v.213 no.5 Optimal Support Positions for a Structure to Maximize Its Fundamental Natural Frequency Won,K.M.;Park.Y.S.
  11. Aeronautical Journal v.84 The Kron's Methodology and Practical Algorithms for Eigenvalue, Sensitivity and Response Analysis of Large Scale Structural Systems Simpson, A.
  12. Mechanical Systems and Signal Processing v.7 no.1 An Algebraic Approach for the Modal Analysis Synthesized Substructure LiaomJ.Y.;Tse,C.C.
  13. American Institute of Aeronautics and Astronautics Journal v.27 no.8 Direct Component Modal Synthesis Technique for System Dynamic Analysis Yee,E.K.;Tsuei,Y.G.
  14. The International Journal of Analytical and Experimental Modal Analysis v.6 no.4 Physical Interpretation and Application of Modal Force Technique Tsuei,Y.G.;Yee,E.K.L.;Lin,A.C.Y.
  15. ASME Trans. Journal of Dynamic Systems Measurement and Control A Method for Modifying Dynamic Properties of Undamped Mechanical Systems Yee,E.K.L.;Tsuei,Y.G.
  16. American Institute of Aeronautics and Astronautics Journal v.27 no.8 Methods for Shifting Natural Frequencies of Damped Mechanical systems Yee,E.K.;Tsuei,Y.G.
  17. Nonlinear Programming : Theory and Algrithms Nonlinear Programming : Theory and Algrithms Bazara,M.S.;Sherali,H.D.;Shetty,C.M.
  18. The Theory of Matrices Lancaster,P.;Tismenesky,M.