참고문헌
- LG 생산기술 no.2월 디프 드로잉 - 소형2차전지 사각케이스의 성형 허훈
- Process. Inst. Mech. Eng. v.1B An Experimental Investigation of Redrawing of Cylindrical Cups Chung, S. Y.;Swift, H. W.
- J. Jpn. Soc. Technol. Plast. v.25 Fracture Mechansim and Fracture Control in Deep Drawing with Hydraulic Counter Pressure ;Studies on Hydraulic Counter Pressure Forming I Nakamur, K.;Nakagawa, T.
- Proc. Japanese Conf. Tech. Plast. A Research on Double Stretch-Drawing Process Gotoh, M.;Kim, Y. S.;Yamashita, Y.
- Proc. Japanese Conf. Tech. Plast. Can Forming of Ti-Sheets by Stretch-Drawing Process, and Adaptability of Spray-coated Dies Sotoh, J.;Gotoh, M.;Maeda, Y.
- Proc. Japanese Conf. Tech. Plast. Mechanical Joining of Seams at Wall of Cup Produced by using Developed Blank Yamaguchi, K;Takakura, N.;Shirakawa, S.;Yamaguchi, T.
- 第10回金屬プレス加工技術硏究會 ステンレス綱板のプレス成形技術に關する最新の話題 渡部豊臣
- J. JSTP v.38 Thinning in the Cylindrical Cup Wall Thickness by Ironing with Redrawing Shimizu, K.;Wada, T.
- J. Mater. Process. Technol. v.47 Consideration of the Re-drawing of Sheet Metals based on Finite Element Simulation Parsa, M. H.;Yamaguchi, K.;Takakura, N.;Imatani, S.
- J. Mater. Process. Technol. v.89 An Elasto-plastic Finite-element Analysis of the Metal Sheet Redrawing Process Huang, Y. M.;Li, C. L.
- 한국소성가공학회지 v.8 no.1 박판성형 성형공정 해석시스템 개발 정완진;조진우
- 한국소성가공학회지 v.6 no.4 유한요소 역해석을 이용한 축대칭 다단계 박판성형에서의 공정변수설계에 관한 연구 조천수;이충호;허훈
- LS-DYNA3D Users manual Hallquist, J. O.
- Comput. Methods Appl. Mech. Engrg. v.96 Advances in One-point Quadrature Shell Elements Belytschko, T.;Wong, B. L.;Chiang, H. Y.
- Int. J. Numer. Meth. Engng. v.17 A Uniform Strain Hexahedron and Quadrilateral with Orthogonal Hourglass Control Flanagan, D. P.;Belytschko, T.