Abstract
To investigate the effect of annealing temperature and time on the recrystallization behavior and microstructure of Zr-based alloys, the specimens of Zr-0.8Sn-0.4Nb-0.4Fe-0.2Cu, Zr-1Nb, Zircaloy-4, and unalloyed Zr were cold-worked and annealed at 400, 500, 600, 700, 800, $900^{\circ}C$ for 30 to 5000 minutes. The hardness, microstructure and precipitate of the specimens were investigated by using micro-hardness tester, optical microscope and transmission electron microscope, respectively. The recrystallization of Zr-based alloys occurred between $400^{\circ}C$ and $600^{\circ}C$. As the content of alloying elements increased, the hardness and recrystallization temperature of the alloys increased though the grain sizes after recrystallization decreased. It was supposed that the hardness of Zr-based alloy with Fe or Cu increased during recovery by the formation of Fe or Cu precipitates.
Zr 합금의 재결정 거동 및 미세조직 변화에 미치는 열처리 온도 및 시간의 영향의 조사하기위하여 순수 Zr과 Zircaloy-4, Zr-0.88n-0.4Nb-0.4Fe-0.2Cu, Zr-1Nb 합금을 냉간가공한 후 $400^{\circ}C$~$900^{\circ}C$에서 각각 30분~5000분 동안 열처리하였다. 열처리 온도에 따른 Zr합금의 경도, 미세조직 및 석출물 특성을 미소경도기, 광학 현미경 및 투과 전자 현미경을 이용하여 조사하였다. 냉간 가공채는 $400^{\circ}C$에서 $600^{\circ}C$ 범위에서 재결정이 일어났는 데 합금원소가 증가함에 따라 재결정온도가 상승했고 결정립 성장이 억제되었다. 그리고 합금원소 증가에 따른 경도증가 영향이 재결정 이후에도 지속되었다. 열처리 온도 및 시간에 비례하여 재결정 이후 결정립 크기는 증가한 반면 경도변화는 상대적으로 미미하였다. Fe나 Cu가 Zr에 첨가될 경우 회복중 경도증가가 수반되는데, 이는 회복중 생성과 관련이 있는 것으로 사료된다.