Design of A Tire-Attachable Cage Wheel for Wetland Use (I)-Study on design parameters of a cage wheel-

트랙터용 습지 보조 차륜의 설계(I)-케이지 휠의 설계 변수에 관한 연구

  • 오영근 (서울대학교 농업생명과학대학 농업기계전공) ;
  • 류일훈 (서울대학교 농업생명과학대학 농업기계전공) ;
  • 김경욱 (서울대학교 농업생명과학대학 농업기계전공)
  • Published : 2000.04.01

Abstract

Effects on tractive performance of design parameters of cage wheel as a traction aid to driving tires of tractor in wet paddy field were investigated experimentally. an experimental cage wheel was designed so that the design parameters such as wheel diameter, wheel width, lug pitch and lug angle could be varied during traction test, The traction test was conducted in two different types of wet paddy field ; shallow and deep harpan fields . Experimental results showed that tractive performance is affected by both soil conditions and the design parameters. A considerable improvement on the tractive performance was obtained by using a cage wheel with 45$^{\circ}$ lug angle in shallow hardpan and smaller lug pitch in deep hardpan. The diameter of cage wheel was mostly influential to the tractive performance both in shallow and deep hardpans.

Keywords

References

  1. 한국농업기계학회지 v.23 no.1 공기압이 바이어스 타이어의 견인성능에 미치는 영향 이동렬;김경욱
  2. 農業機械學會誌 v.52 no.4 かご車輪の設計基準?立に關する硏究(第1報) Kittichai. T.;?田 昭;本多雅志
  3. Investigation on rice field characteristics and tractor operating conditions in INDONECIA CREATA
  4. Trans. of ASAE v.19 no.3 Pull and lift characteristics of single lugs on rigid wheels in wet rice soil Gee-Clough. D.;W.J. Chancellor
  5. Trans. of th ASAE v.17 no.1 Off-road traction prediction for wheeled vehicles Wismer. R.D.;H.J. Luth
  6. Proc. 10th Int. Conf. ISTVS The Measurement of forces under multiple cage wheel lugs Salokhe. V.M.;D. Gee-Clough;Harjono