초록
단열암반의 수리전도도 텐서를 계산하고 이방성에 대한 정량적인 평가를 수행하기 위해서 단열의 수리적, 기하학적 통계 특성에 근거하여 3차원 단열연결망 모델을 구성하였다. 현장에서 수행된 단정주입시험의 수치모델링을 통해 계산된 수리전도도는 현장시험 결과와 비교적 잘 일치하였다. 따라서 구성된 3차원 단열 연결망 모델이 해석대상 암반의 수리 특성을 구현할 수 있음을 확인하였다. 대상암반의 대표요소체적 규모에서 계산된 블록 수리전도도는 단정주입시험에서 구한 수리전도도의 산술과 조화 평균 사이의 값이며, 2차원 수평단면상에서 남-북 방향의 수리전도도는 동-서 방향에 비해서 약 1.4 배로써 이방성은 크지 않았다. 블록 수리전도도와 단정 주입시험 모델링을 통해 구한 수리전도도의 상관성은 낮게 나타났다. 이는 단정 주입시험 모델링을 통한 암반의 수리전도도는 시추공의 패커구간과 교차하는 단열의 수와 투수량계수에 큰 영향을 받기 때문인 것으로 분석된다.
A three-dimensional discrete fracture network model based on probabilistic characteristics of fracture geometry and transmissivity was designed to calculate the conductivity tensor and to estimate theanisotropy of conductivity. The conductivities, $K_p$, obtained from the numerical simulation of single-holepacker test corresponded well to those from the field tests. From this, it can be concluded that thefracture network model designed in this study can represent hydraulic characteristics of in-situ fractured rock mass. Block-scale conductivities, $K_b$, estimated from the modelling of steady-state flow through the REV-scale block were ranged between the arithmetic mean and harmonic mean of theconductivity estimates from packer tests. The conductivity along north-south direction was 1.4 timesgreater than that along the east-west direction. It was concluded that the anisotropy of conductivitywas insignificant. It was also found that there was a little correlation between $K_b$ and $K_p$. This would be to that the conductivities from the packer test simulation was strongly dependent on thetransmissivity and the number of fractures within the packer test intervals.