대한전기학회논문지:전기물성ㆍ응용부문C (The Transactions of the Korean Institute of Electrical Engineers C)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

다결정실리콘 표면 미세가공 기술을 이용한 초소형 기계식 스위치의 설계 및 제작

Design and fabrication of a Micromechanical Switch Using Polysilicon Surface Micromachining

  • 채경수 (고려대 마이크로머시닝학과) ;
  • 한승오 (KIST 마이크로시스템 연구센터 연구원) ;
  • 하종민 (고려대 마이크로머시닝학과) ;
  • 문성욱 (KIST 마이크로시스템 연구센터 연구원) ;
  • 박정호 (고려대 전기공학과)
  • 발행 : 2000.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A micromechanical switch that can be used as a logic gate is described in this paper. This switch consists of fixed input electrodes an output electrode Vcc/GND electrodes and movable plates suspended by crab-leg flexures. for mechanical switching of an electrical signal a parallel plate actuator which comes in contact with output electrode was used. Provided that movable plates are connected to Vcc and a low input voltage(ground signal) is applied to the fixed input electrodes the movable plates are pulled by an electrostatic force between the fixed input electrodes and the movable plates. the proposed micromechanical switch was fabricated by surface micromachining technology with$2\mum$ -thick poly-Si and the measured threshold voltage for ON/OFF switching was 23.5V.

키워드

참고문헌

  1. Ming C. Wu ,'Micromachining for Optical and Optoelectronic Systems', Proc. IEEE, Vol. 85, No. 11, pp. 1833-1856, Nov 1997 https://doi.org/10.1109/5.649660
  2. Z. Jamie Yao, Shea Chen, Susan Eshelman, David Denniston and Chuck Goldsmith, 'Micromachined Low-Loss Microwave Switches', IEEE J. MEMS, VOL.8, No.2, pp. 129-134. June 1999 https://doi.org/10.1109/84.767108
  3. Paul M. Zavracky, Sumit Maiumder and Nicol E. McGruer, 'Micromechanical Switches Fabricated Using Nickel Surface Micromachining', IEEE J. MEMS, VOL.6, NO.1, pp. 3-9, March 1997 https://doi.org/10.1109/84.557524
  4. M-A Grerillat, P. Thiebbaud, C Linder and N F de Rooij, 'Integrated Circuit Compatible Electrostatic Polysilicon Microrelays', J. Micromech. Microeng. pp. 156-160, 5, 1995 https://doi.org/10.1088/0960-1317/5/2/026
  5. Ezekiel J. J. Kruglick, Kristofer S. J. Pister, 'MEMS Relay Basde Digital Logic System', Transducer '99, Sendai, Japan, pp. 818-821, June 7-10 1999
  6. Norihiro Asada, Hidetoshi Matsuki and Masayoshi Esashi, 'A Fail-Safe Logic Operator Using and Insulated Planar Transformer', Electrical Engineering in Japan, Vol. 115, No.2, pp. 115-122, 1995
  7. M E McNie, K M Brunson, D O King and A R D jones, 'Low Threshold Polysilicon Micro- mechanical Switches', Transducer '99, Sendai, Japan, pp. 1834-1837, June 7-10 1999
  8. A. Hirata, K. Machida, H. Kyuragi, and M. Maeda, 'A Micromechanical Switch as The Logic Elements for Circuits in Multi Chip Module on Si(MCM-Si)', Proc. IEEE MEMS Conference '99, pp. 582-587, 1999 https://doi.org/10.1109/MEMSYS.1999.746893
  9. Kyoung Soo Chae, Seung Oh Han, Jong Min Ha, Jungho Pak, Sung Moon, 'Design and Fabrication of a Micro Switch for Logic Devices', Proc. The 2nd Korean MEMS Conference, pp. 269-275, 2000
  10. Albert P. Pisano, Young-Ho Cho, 'Mechanical Design Issues in Laterally-driven Microstructures', Sensors and Actuators, A21-A23, pp. 1060-1064, 1990 https://doi.org/10.1016/0924-4247(90)87089-2
  11. James M. Bustillo, Roger T. Howe and Richard S. Muller, 'Surface Micromachining for Microelectromechanical Systems', Proc. IEEE, Vol. 86, No. 8, pp. 1552-1574, Aug. 1998 https://doi.org/10.1109/5.704260