대한전기학회논문지:전기물성ㆍ응용부문C (The Transactions of the Korean Institute of Electrical Engineers C)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

$Al_2O_3+Y_2O_3 첨가량에 따른 {\beta}-SiC-ZrB_2$계 전도성 복합체의 특성

The Properties of $\beta-SiC-ZrB_2$ Electroconductive Ceramic Composites with $Al_2O_3+Y_2O_3$Contents

  • 신용덕 (원광대 전기전자공학부) ;
  • 주진영 (원광대 전기전자공학부) ;
  • 황철 (원광대 전기전자공학부)
  • Shin, Yong-Deok (Dept.of Electric Electronics Information Engineering, Engineering College, Wonkwang University) ;
  • Ju, Jin-Young (Dept.of Electric Electronics Information Engineering, Engineering College, Wonkwang University) ;
  • Hwang, Chul (Dept.of Electric Electronics Information Engineering, Engineering College, Wonkwang University)
  • 발행 : 2000.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The mechanical and electrical properties of the hot-pressed and annealed $\beta-SiC-ZrB_2$ electroconductive ceramic composites were investigated as a function of the liquid forming additives of$Al_2O_3+Y_2O_3$ Phase analysis of composites by XRD revealed $\alpha-SiC(6H) ZrB_2\; and YAG(Al_5Y_3O_{12})$ The relative density of composites were increased with increased Al2O3+Y2O3 contents. The Flexural strength showed the highest value of 390.6MPa for composites added with 20wt% Al2O3+Y2O3 additives at room temperature. Owing to crack deflection crack bridging phase transition and YAG of fracture toughness mechanism the fracture toughness showed the highest value of 6.3MPa.m1/2 for composites added with 24wt% Al2O3+Y2O3 additives at room temperature. The resistance temperature coefficient showed the value of$ 2.46\times10^{-3}\;, 2.47\times10^{-3},\; 2.52\times10^{-3}/^{\circ}C$ for composite added with 16, 20, 24wt% Al2O3+Y2O3 additives respectively. The electrical resistivity of the composites was all positive temperature coefficient resistance(PTCR) in the temperature range of $256{\circ}C\; to\; 900^{\circ}C$.

키워드

참고문헌

  1. Mamoru Mitomo 'Microstructural Development During Gas-Pressure Sintering of \alpha-Silicon Nitride' J. Am. Ceram. Soc., 75[1], pp. 103-108, 1992 https://doi.org/10.1111/j.1151-2916.1992.tb05449.x
  2. Nitin P. Padture 'In Situ-Toughened Silicon Carbide' J. Am. Ceram. Soc., 77[2], pp. 519-23, 1994 https://doi.org/10.1111/j.1151-2916.1994.tb07024.x
  3. Mamoru Mitomo, Young-Wook Kim, Hideki Hirotsuru 'Fabrication of Silicon carbide nanoceramics' J. Mater. Res., Vol. 11, No.7, Jul 1996
  4. Yong Deok Shin and Yong Kap Park 'Properties of Hot-Prssed SiC-$ZrB_2$ Electro Conductive Ceramic Composites' Trans. KIEE. Vol. 46, NO.4, pp. 566-572, 1997
  5. Yong Deok Shin and Jin Young Ju 'Properties and Manufacture of the \beta-SiC-$ZrB_2$ Composites Densified by Liquid-Phase Sintering' Trans. KIEE. Vol. 48 C, NO 2, pp. 92-97, 1999
  6. Yang Deok Shin, Jin Young Ju, Se Won Yoon and Chul Hwang 'Properties and Manufacture of the \beta-SiC-$ZrB_2$ Composites Densified by Liquid-Phase Sintering(II)' Trans. KIEE. Vol. 49 C, NO 2, pp. 92-97, 2000
  7. A. G. Evans and T. R. Wilshaw 'Quasi-Static Solid Particle Demage in Brittle Solids-1. Observation Analysis and Implication' Acta Metallurgica. Vol. 24, pp. 939-956, 1976 https://doi.org/10.1016/0001-6160(76)90042-0
  8. 'Philips Research Reports' Philips Res. Repts 13, 1-9, 1958
  9. Yong Deok Shin 'Electric Discharge Machining of Hot-Pressed SiC-$ZrB_2$ Composites Ceramic' Trans. KIEE. Vol. 46, NO.7, pp. 1062-1067, 1997
  10. Patricia A. Hoffman 'Thermo Elastic Properties of Silicon Carbide-Titanium Diboride Particulate Composites' M. S Thesis, 1992
  11. Yuklnori Kutsukake 'The Development of $ZrB_2$-Based Cermert' Ceramic Data Book, pp. 687-703, 1987
  12. Jurgen Rodel 'Interaction Between Crack Deflection and Crack Bridging' Journal of the European Ceramic Society, 10, pp. 143-150, 1992 https://doi.org/10.1016/0955-2219(92)90027-B