고온초전도변압기의 특성시험

Test of an High Temperature Superconducting Power Transformer

  • 발행 : 2000.09.01

초록

This paper describes the test results of a single phase 3kVA high temperature superconducting power transformer. The tapes are made with Bi-2223 and have silver alloy as the matrix. Four double pancake windings are used. Among them two double pancake windings are connected in series for high voltage winding and the others are connected in parallel for low voltage winding. The rated voltage and current of primary winding and secondary winding are 220/110V. 13.7/27.3A. Fundamental characteristics are obtained through short circuit and no load test. The over load capability and characteristics are investigated.

키워드

참고문헌

  1. Sam P. Mehta, Nicola Aversa, and Michael S. Walker, 'Transforming transformers,' IEEE Spectrum, Vol.34, No.7, pp. 43-49, July 1997 https://doi.org/10.1109/6.609815
  2. S.W.Schwenrerly, et al., 'Performance of a 1-MVA Demonstration Transformer,' IEEE Trans. Applied Superconductivity, Vol.9, No.2, pp.680-684, 1999 https://doi.org/10.1109/77.783387
  3. K. Funaki, et al., 'Preliminary tests of a 500kVA class oxide superconducting transformer cooled by sub-cooled nitrogen,' IEEE Trans. on Applied Superconductivity, vol.7, No.2, pp.824-827, 1997 https://doi.org/10.1109/77.614630
  4. J.K.Lee, et al., 'Development of a Three Phase 100kVA Superconducting Power Transformer with Amorphous Core,' IEEE, Trans. Applied Superconductivity, Vol.9, No.2, 1999, pp.1293-1296 https://doi.org/10.1109/77.783538
  5. 차귀수 등, '고온초전도선재의 자화손실 측정,' 대한전기학회 논문지, 제48권(B), 제4호, pp.182-186, 1999
  6. W.T.Norris, 'Calculation of Hysteresis Losses in Hard Superconductors carrying AC: isolated conductors and edges of thin sheets,' Jour. of Physics. D, vol.3, pp.489-507, 1970 https://doi.org/10.1088/0022-3727/3/4/308
  7. J.K.Sykulski, K.F.Goddard, R.L.Stoll, 'Design and Construction of a High Temperature Superconducting Transformer,' ICEM'98, Istanbul, Turkey, pp.971-975, Sept., 1998