수소 플라즈마 처리에 의한 실리콘 직접접합 특성에 관한 연구

A Study on the Characteristics of Silicon Direct Bonding by Hydrogen Plasma Treatment

  • Choe, U-Beom (Dept.of Electrical Engineering, Engineering College, Korea University) ;
  • Ju, Cheol-Min (Dept.of Electrical Engineering, Engineering College, Korea University) ;
  • Kim, Dong-Nam (Dept.of Electrical Engineering, Engineering College, Korea University) ;
  • Seong, Man-Yeong (Dept.of Electrical Engineering, Engineering College, Korea University)
  • 발행 : 2000.07.01

초록

The plasma surface treatment, using hydrogen gas, of the silicon wafer was investigated as a pretreatment for the application to silicon-on-insulator (SOI) wafers using the silicon direct bonding technique. The chemical reactions of hydrogen plasma with surfaces were used for both the surface activation and the removal of surface contaminants. As a result of exposure of silicon wafer to the plasma, an active oxide layer was formed on the surface, which was rendered hydrophilic. The surface roughness and morphology were estimated as functions of plasma exposing time as well as of power. The surface became smoother with decreased incident hydrogen ion flux by reducing plasma exposing time and power. This process was very effective to reduce the carbon contaminants on the silicon surface, which was responsible for a high initial surface energy. The initial surface energy measured by the crack propagation method was 506 mJ/m2, which was up to about three times higher than that of a conventional RCA cleaning method.

키워드

참고문헌

  1. Y. Mastumoto, M. lwakiri, H. Tanaka, M. Ishida and T. Nakamura, 'A capacitive accelerometer using SDB-SOl structure,' Sensors and Actuators A 53, pp. 267-272, 1996 https://doi.org/10.1016/0924-4247(96)01154-5
  2. S. Matsumoto, Y. Hiraoka, T. lshiyama, T. Sakai, T. Yachi, J. Yamada, A. Ito and Y. Arimoto, 'Study on the device characteristics of a quasi-SOl power MOSFET fabricated by reversed silicon wafer direct bonding,' IEEE Trans. Electron Devices 45 pp. 1940-1945, 1998 https://doi.org/10.1109/16.711359
  3. H. Takagi, K. Kikuchi, R. Maeda, T. R. Chung and T. Suga, 'Surface activated bonding of silicon wafers at room temperature,' Appl. Phys. Lett. 68 pp. 2222-2224, 1996
  4. 홍진균, 'SOI wafer 기술동향', 반도체산업, 7월호, pp. 64-76, 1998
  5. W. P. Maszara, 'Silicon-on-insulator by wafer bonding: A review,' J. Electrochem Soc., Vol. 138, p. 341-346, 1991 https://doi.org/10.1149/1.2085575
  6. B. E. Roberds and S. N. Farrens, 'An atomic force microscopy study on the roughness of silicon wafers correlated with direct wafer bonding,' J. Electrochem Soc., Vol. 143, pp. 2365-2371, 1996 https://doi.org/10.1149/1.1837009
  7. Q. Y. Tong and U. Gosele, 'A model of low-temperature wafer bonding and its applications,' J. Electrochem Soc., Vol. 143, pp. 1773-1779, 1996 https://doi.org/10.1149/1.1836715
  8. Q. Y. Tong and U. Gosele, ' The role of surface chemistry in bonding of standard silicon wafers,' J. Electrochem Soc., Vol. 144, pp. 384-389, 1997 https://doi.org/10.1149/1.1837415
  9. S. N. Farrens, J. R. Dekker, J. K. Smith and B. E. Roberds, 'Chemical free room temperature wafer to wafer direct bonding,' J. Electrochem. Soc. 142, pp. 3949-3955, 1995 https://doi.org/10.1149/1.2048440
  10. H. Takagi, R. Maeda, N. Hosoda and T. Suga, 'Transmission electron microscope observations of Si/Si interface bonded at room temperature by Ar beam surface activation,' Jpn. J. Appl. Phys., 38, pp. 1589-1594, 1999