대한전기학회논문지:전기기기및에너지변환시스템부문B (The Transactions of the Korean Institute of Electrical Engineers B)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

경계요소법을 이용한 전자총 Shield Cup의 자기차폐 특성해석

Boundary Element Analysis of Magnetic Shielding Effects of Shield Cup in Electron Gun

  • 발행 : 2000.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently large size color TV and computer monitor are very popular and a lot techniques are being developed to get a high quality picture on the screen through reducing the convergence error among the red, green and blue beams and achieving a high focusing. One of the techniques is considering the mutual effects of the components of the Brown tube. The magnetic deflection yoke, especially, stands immediately next to the electron gun and generates the leakage magnetic fields at the electron gun which affects the trajectories of the electron beams inside the gun. Hence a shield cup made of thin conducting plate is located at the end of electron gun in order to shield the leakage flux from the deflection yoke. Since the red, green and blue beams are placed unsymmetrically the shielding effects of the shield cup on the beams are not same and eddy current controller, made of thin conducting plate, is auxiliary placed inside the shield cup. In this paper a transient magnetic field analysis algorithm is developed using boundary element method, and applied to the analysis of the shielding effects of the eddy current controller of shield cup in an electron gun.

키워드

참고문헌

  1. M.Koizumi, Y. Higuchi, K.Majima and I.Yoshimi, 'Prediction Method for Convergence Error among R.G. and B Electron Beams in CRT Due to Eddy Current on Shield Cup', JAPAN DISPLAY'92, pp. 277-280, 1992
  2. M.J. Dekker, 'Eddy Currents induced by Deflection Fields in Electron Guns of Cathode Ray Tubes', IEEE Transactions on Magnetics, Vol. 33, No. 2, pp. 2179-2182,1997 https://doi.org/10.1109/20.582764
  3. O.Biro and K.Preis, 'On the use of magnetic vector potential in the finite element analysis of three-dimensional eddy currents,' IEEE Trans. on Magn., Vol.25,No.4,pp.3145-3159, July 1989 https://doi.org/10.1109/20.34388
  4. Shao Keran and Zhou Keding, 'Boundary element solutions to transient eddy current problems', Engineering Analysis,Vol. 1, No. 4, pp. 182-187, 1984 https://doi.org/10.1016/0264-682X(84)90026-1
  5. P.K. Banerjee and R.Bufferfield, Bounary Element Methods in Engineering Science, McGRAW-HILL, London, 1981, Chap. 9, pp. 216-221
  6. C.A. Brebbia, J.C.F. Telles and L.C. Wrobel, Boundary Element Techniques, Germany, 1984, Chap. 4, pp. 154-156
  7. 정 광식, 경계요소법을 이용한 브라운관 내의 전자총에 대한 과도상태의 자장해석, 석사학위논문, 서울대학교 1999
  8. Sompoth Peaiyoung, Computational Aspects of TheBoundary Element Method Applied to Two- and Three-Dimensional Magnetic Field Problems, PhD. Dissertation, Rensselaer Polytechnic Institute, New York, 1987
  9. C.S.Koh, S.Y.Hahn and O.A.Mohammed, 'Nonlinear shape design sensitivity analysis for magnetostatic problems using boundary element method,' IEEE Transactions on Magnetics, Vol. 31, No 3, pp. 2008-2011, 1995
  10. KwangSig Jung, Chang Seop Koh and Song-yop Hahn, 'A Transient Magnetic Field Analysis of Electron Gun in Cathode Ray Tube Using Boundary Element Method'ICEE'98, Vol. 2, pp. 87-90, 1998
  11. T. Todata, A research on the application of the boundaryelement method into magnetic fields analysis, Ph.D Dissertation, Oita University, Japan, 1995
  12. M. Enokizono, 境界要素解析, 培風館, Japan, Chap. 6, pp. 160-167