Parallel Operation of Two Converters using Zero Current Transformer Method

영산변류기 동작 방식을 이용한 2개의 컨버터 병렬 운전

  • 송승찬 (충남대 전기공학과 박사과정 수료) ;
  • 성제진 (충남대 전기공학과)
  • Published : 2000.04.01

Abstract

In the conventional method, two CTs have been used to share the load current equally with two converters. A new simle method to find out the current difference between two converters using only one CT as a ZCT is suggested. Two experimental prototype converters were designed and implemented for the evaluation of the load current sharing. The results of experiment show that the newly proposed ZCT method using only one CT could make a good load current sharing than the conventional method required two CT when operating two converters in parallel.

Keywords

References

  1. Shiguo Luo, Zhihong Ye, Ray-Lee, Fred C. Lee, 'A Classification and Evaluation of Paralleling Methods for Power Supply Modules', IEEE Power Electronics Specialists Conference, pp 910-908, 1999 https://doi.org/10.1109/PESC.1999.785618
  2. M. Jordan, 'UC3907 Load Share IC Simplifies Parallel Power Supply Design', Unitrode Application Note U-129
  3. I.Batarseh, K.Siri and H. Lee, 'Investigation of the Output Droop Characteristic of Parallel -Connected DC-DC Converters', IEEE Power Electronics Specialists Conference, pp. 1342-1351, 1994 https://doi.org/10.1109/PESC.1994.373859
  4. J. Perkinson, 'Current Sharing of Redundant DC-DC Converters in High Availability Systems - A Simple Approach', IEEE Applied Power Electronics Conference, pp. 952-956, 1995 https://doi.org/10.1109/APEC.1995.469055
  5. C. Jamerson, C. Mullett, 'Paralleling Supplies via Various Droop Methods', HFPC, pp. 68-76, 1994
  6. J. Rajagopalan, K. XIng, Y. Guo and F. C. Lee, B. Manners, 'Modeling and Dynamic Analysis of Paralleled dc/dc Converters with Master-Slave Current Sharing Control', IEEE Applied Power Electronics Conference, pp. 678-684, 1996 https://doi.org/10.1109/APEC.1996.500513
  7. R.H. Wu, T. Kohama, Y. Koderam T. Ninomiya, F.Ihara, 'Load-Current Sharing Control for Parallel Operation of DC-to-DC Converters', IEEE Power Electronics Specialists Conference, pp. 101-107, 1993 https://doi.org/10.1109/PESC.1993.471941
  8. V. J. Thottuvelil, George C. Verghese, 'Stability Analysis of Paralleled DC/DC Converters with Active Current Sharing', IEEE Power Electronics Specialists Conference, pp. 1080-1086, 1996 https://doi.org/10.1109/PESC.1996.548716
  9. T. Ninomiya, R.H. Wu, Y. Kodera, T. Kohama, F. Ihara, 'Novel Control Strategy for Parallel Operation of Power Supply Model', IEEE Power Conversion Conference pp. 159-164, 1993 https://doi.org/10.1109/PCCON.1993.264230
  10. Z. Moussaoui, I. Batarseh, H. Lee, C. Kennedy, 'An overview of the control scheme for distributed power systems', South 96 Conference Record, pp. 584-591, 1996 https://doi.org/10.1109/SOUTHC.1996.535130
  11. K. Siri, J. Banda, 'Analysis and Evaluation of Current-Sharing Control for Parallel-Connected Dc-Dc Converters Taking into Account Cable Resistance', IEEE Aerospace Applications Conference, pp. 29-48, 1955 https://doi.org/10.1109/AERO.1995.468915
  12. 박상은, 손승찬, 성세진 외,'ZCT방식의 master-slave형 DC-DC 컨버터 병렬 운전', 전력전자 학술대회, pp 655-658, 1999. 7
  13. M. Brown, Power Supply Cookbook, Butterworth-Heinemann, 1994
  14. 김희준, 스위치모드파워서플라이, 성안당, 1994
  15. A. I. Pressman, Switching Power Supply Design, McGraw-Hill Inc., pp 427- 458, 1992
  16. RON LENK, PRACTICAL DESIGN OF POWER SUPPLIES, McGraw-HILL, pp. 128-135, 1998
  17. Ralp E. Tarter, Solid State Power Conversion Handbook, John Wiley & Sons, Inc. 1993
  18. 백수현, 김희준, 김영석, 홍순찬 역, 전력전자공학, 교보문고, 1996
  19. T. F. Wu, K. Siri, J. Banda, 'The Central-Limit Control and Impact of Cable Resistance on Current Distribution for parallel-Connected DC-DC Converters', IEEE Power Electronics Specialists Conference, pp. 694-702, 1994 https://doi.org/10.1109/PESC.1994.349662
  20. K. J. Astrom, T. Hagglund, Automatic Tuning of PID Controllers, Instruments Society of America, pp.52-54, 1988
  21. Chee-Mun Org, Dynamic of Electric Machinery using MATLAB/SIMULINK, Prentice Hall PTR, 1998