Calculation of Forward Voltage Drop of IGBTs

IGBT 순방향 전압강하의 계산

  • 최병성 (아주대 대학원 전자공학과 졸업) ;
  • 정상구 (아주대 공대 전자공학과)
  • Published : 2000.03.01

Abstract

A simple methode for calculating the forward voltage drop of IGBTs is presented, on the voltage drops on the p+ body, the reverse biased depletion region between p+body and epi-layer, the epi layer, and the forward biased collector junction. The decrease of the total current density in the epi layer near the p+ body is taken into account. The proposed methode allows a simple but accurate determination of the forward voltage drop in IGBTs, avoiding the complex path taken in the previous model for the forward voltage drops on channel, accumulation region, and epi region. Numerical simulations for 1kV NPT-IGBT with a uniformly doped collector are shown to support the analytical results.

Keywords

References

  1. S. D. Kim, I. J. Kim, M. K. Han, Y. I. CHOI, 'An accurate on-resistance model for low voltage VDMOS devices,' Solid-State Electronics, Vol. 38, No. 2, pp. 345-350, 1995 https://doi.org/10.1016/0038-1101(94)00122-V
  2. D. S. KUO, CHENMING HU, 'An analytical model for the power Bipolar-MOS Transistor,' Solid-State Electro nics, Vol. 29, No. 12, pp. 1229-1237, 1986 https://doi.org/10.1016/0038-1101(86)90128-0
  3. Y. YUE, J. J. LIOU, and I. BATARSEH, 'An analytical insulated-gate bipolar transistor(IGBT) model for steady-state and transient applications under all free-carrier injection conditions,' Solid-State Electronics, Vol. 39, No. 9, pp. 1277-1282, 1996 https://doi.org/10.1016/0038-1101(96)00046-9
  4. R. A. Colclaser, 'Microelectronics: Processing and Device Design', pp. 190-198, John Wiley, New York, 1980
  5. S. K. Chung, 'Injection Currents Analysis of p+/n- Buffer Junction', IEEE Trans. Electron Devices, vol. 45, No. 8, p. 1850, 1998 https://doi.org/10.1109/16.704390
  6. 최병성, 정상구, 'IGBT의 콜렉터 구조에 따른 홀 주입료율의 변화', 대한전기학회 하계학술대회 논문집 D, pp. 1956-1958, 1999