참고문헌
- J. M. Bustillo, R. T. Howe and R. S. Muller, 'Surface Micromachining for Microelectromechanical Systems,' Proceeding of the IEEE, Vol. 86, No. 8, pp. 1552-1574, 1998 https://doi.org/10.1109/5.704260
- H. Guckel, 'High-Aspect-Ratio Micromachining Via Deep X-Ray Lithography,' Proceedings of the IEEE, Vol. 86, No. 8, pp. 1586-1593, 1998 https://doi.org/10.1109/5.704264
- H. Miyajima, and M. Mehregany, 'High-Aspect-Ratio Photolithography for MEMS Applications,' Journal of Microelectromechanical Systems, Vol. 4, No. 4, pp. 220-229, 1995 https://doi.org/10.1109/84.475549
- G.T.A. Kovacs, N.I. Maluf and K.E. Petersen, 'Bulk Micromachining of Silicon,' Proceedings of the IEEE, Vol. 86, No. 8, pp. 1536-1551, 1998 https://doi.org/10.1109/5.704259
- K.E. Bean, 'Anisotropic Etching of Silicon,' IEEE Transactions on Electron Devices, Vol. Ed-25, No. 10, pp. 1185-1193, 1978
- K. Sato, M. Shikida and Y. Matsushima, 'Characterization of Anisotropic Etching Properties of Single-Crystal Silicon: Effects of KOH Concentration of Etching Profiles,' IEEE MEMS Workshop, pp. 406-411, 1997 https://doi.org/10.1109/MEMSYS.1997.581871
- S. H. Kim, S. H. Lee, H. T. Lim, Y. K. Kim and S. K. Lee, 'Anisotropic Bulk Etching of (110) Silicon with High Aspect Ratio,' Transactions of the Institute of Electrical Engineers of Japan, Vol. 118-E, No. 1, pp. 32-36, 1998
- P. Krause, and E. Obermeier, 'Etch Rate and Surface Roughness of Deep Narrow U-grooves in (110)-oriented Silicon,' Journal of Micromechanics & Microengineering, Vol. 5, pp. 112-114, 1995 https://doi.org/10.1088/0960-1317/5/2/014
- E. Bassous, 'Fabrication of Novel Three-Dimensional Microstructures by the Anisotropic Etching of (100) and (110) Silicon,' IEEE Transactions on Electron Devices, Vol. ED-25, No. 10, pp. 1178-1185, 1978
- D. R. Ciarlo, 'A Latching Accelerometer Fabricated by the Anisotropic Etching of (110) Oriented Silicon Wafers,' Journal of Micromechanics & Microengineering, Vol. 2, pp. 10-13, 1992 https://doi.org/10.1088/0960-1317/2/1/003
- Y. Uenishi, M. Tsugai, and M. Mehregany, 'Micro-Opto-Mechanical Devices Fabricated by Anisotropic Etching of (110) Silicon,' IEEE MEMS Workshop '94, pp. 319-324, 1994 https://doi.org/10.1109/MEMSYS.1994.555830
- J. Mizuno, K. Nottmeyer, T. Kabayashi, K. Minami and M. Esashi, 'Silicon Bulk Micromachined Accelerometer with Simultaneous Linear and Angular Sensitivity,' The 9th International Conference on Solid-State Sensors and Actuators Workshop, pp. 1197-1200, 1997 https://doi.org/10.1109/SENSOR.1997.635420
- P. Krause, E. Obermeier, and W. Wehl, 'Backshooter-A New Smart Micromachined Single-Chip Inkjet Printhead,' The 8th International Conference on Solid-State Sensors and Actuators, and Eurosensors IX, pp. 325-328, 1995
- T. M. Harms, M. Kazmierczak, and F. M. Gerner, 'Experimental Investigation of Heat Transfer and Pressure Drop through Deep Microchannels in a (110) Silicon Substrate,' Proceedings of the ASME Heat Transfer Division, Vol. 1, pp. 347-357, 1997
- R. S. Huang, E. A. Sani and C.Y. Kwok, 'A Novel Accelerometer Using Silicon Micromachined Cantilever Supported Optical Grid and PIN Photodetector,' The 8th International Conference on Solid-State Sensors and Actuators, and Eurosensors IX, pp. 663-666, 1995
- K. Ohwada, Y. Negoro, Y. Konaka, and T. Oguchi, 'Uniform Groove-depths in (110) /--Si anisotropic etching by ultrasonic waves and application to accelerometer fabrication,' Sensors and Actuators, Vol. A50, pp. 93-98, 1995 https://doi.org/10.1016/0924-4247(96)80090-2
- F. Laermer, A. Schilp, K. Funk and M. Offenberg, 'BOSCH Deep Silicon Etching:Improving Uniformity and Etch Rate for Advanced MEMS Applications,' IEEE MEMS Workshop, pp. 211-216, 1999 https://doi.org/10.1109/MEMSYS.1999.746812
- R. Todv, K. Minami, and M. Esashi, 'Thin Beam Bulk Micromachining Based on RIE and Xenon Difluoride Silicon Etching,' The 9th International Conference on Solid-State Sensors and Actuators Workshop, pp. 671-674, 1997 https://doi.org/10.1109/SENSOR.1997.613741
- C.S.B. Lee, S.J. Han, and N.C. MacDonald, 'Multiple Depth, Single Crystal Silicon Microactuators For Large Displacement Fabricated by Deep Reactive Ion Etching,' Solid-State Sensor and Actuator Workshop, pp. 45-50, 1998
- P. C. Hsu, C. H. Mastrangelo, and K. D. Wise, 'A High Sensitivity Polysilicon Diaphragm Condenser Microphone,' IEEE MEMS Workshop, pp. 580-585, 1998 https://doi.org/10.1109/MEMSYS.1998.659822
- K. S. Seo, Y. H. Cho, and S. K. Youn, 'An Electrostatically-Tunable Switching Micromirror using (110) Silicon Wafers,' Digest of the LEOS Summer Topical Meeting, pp. 41-42, 1996 https://doi.org/10.1109/LEOSST.1996.540786
- N. Yazdi, and K. Najafi, 'An All-Silicon Single-Wafer Fabrication Technology for Precision Microaccelerometers,' The 9th International Conference on Solid-State Sensors and Actuators Workshop, pp. 1181-1184, 1997 https://doi.org/10.1109/SENSOR.1997.635416
- C. Burrer, and J. Esteve, 'High-precision BESOI-based resonant accelerometer,' Sensors and Actuators, A50, pp. 7-12, 1995 https://doi.org/10.1016/0924-4247(95)01032-V
- H. T. Lim and Y. K. Kim, 'Novel Fabrication of Comb Actuator Using Reactive Ion Etching of Polysilicon and (110) Si Anisotropic Bulk etching in KOH,' Japan Journal of Applied Physics, Vol. 37, pp. 7086-7092, 1998 https://doi.org/10.1143/JJAP.37.7086
- S. H. Kim, S. H. Lee, and Y. K. Kim, 'A Novel Fabrication Process for High-Aspect Ratio Comb Actuators Combining (110) Silicon Anisotropic Etching with Electroplating,' The 10th International Conference on Solid-State Sensors and Actuators, pp. 110-113, 1999
- C. -W. Baek and Y. -K. Kim, 'Novel fabrication process of freestanding metallic microstructures using double electroplating,' Japanese Journal of Applied Physics, Vol. 37, Part 1, No. 12B, pp. 7104-7109, 1998 https://doi.org/10.1143/JJAP.37.7104