The Characteristics Analysis of a HTS Transformer

고온초전도변압기의 특성해석

  • Published : 2000.01.01

Abstract

This paper presents the performance evaluation of an HTS transformer. Numerical calculation by finite element method was used to evaluate the performance. BSCCO-2223 HTS tapes and double pancake winding were adopted in this design. Four double pancake windings were used in total. Among them two windings were connected in series for high voltage winding and two windings are connected in parallel for low voltage winding. Propertied of various type of the winding arrangement were examined. Characteristics of the transformer during the transient which was caused by sudden short were simulated. The current limiting effect, temperature rise and resistance growth of the superconducting winding were shown.

Keywords

References

  1. K. Funaki, et al., 'Preliminary Tests of a 500kVA-Clss Oxide Superconducting Transformer Cooled by Subcooled Nitrogen,' IEEE Trans. Applied Superconductivity, Vol. 7, No. 2, pp.824-827, 1997 https://doi.org/10.1109/77.614630
  2. J. K. Sykulski, et al., 'Prospects for large high-temperature superconducting power transformers : conclusions from a design study,' IEEE Proc. Electri. Power Appl., Vol.146, No. 1, pp.41-52, 1999 https://doi.org/10.1049/ip-epa:19990192
  3. S. W. Schwenrerly, et al., 'Performance of a 1-MVA Demonstration Transformer,' IEEE Trans. Applied Superconductivity, Vol.9, No.2, pp.680-684, 1999 https://doi.org/10.1109/77.783387
  4. J. K. Lee, et al., 'Development of a Three Phase 100kVA Superconducting Power Transformer with Amorphous Core,' IEEE Trans. Applied Superconductivity, Vol. 9, No. 2, pp.1293-1296, 1999. https://doi.org/10.1109/77.783538
  5. 차귀수 등, '고온초전도선재의 자화손실 측정,' 대한전기학회 논문지, 제48권(B), 제4호, pp. 182-186, 1999
  6. W. T.Norris, ' Calculation of Hysteresis Losses in Hard Superconductors Carrying AC,' Jour. of Physics, Vol. 3, pp.489-507, 1970 https://doi.org/10.1088/0022-3727/3/4/308