3Cr-1Mo-V강의 재현 열영향부에서 최고가열온도가 수소침식감수성에 미치는 영향

Effect of Peak Temperatures on Hydrogen Attack Susceptibility in Simulated Weld Heat Affected Zone of 3Cr-1Mo-V Steel

  • 김동진 (한국중공업(주) 기술연구원) ;
  • 김병훈 (한국중공업(주) 기술연구원) ;
  • 공병욱 (한국중공업(주) 기술연구원) ;
  • 김정태 (한국중공업(주) 기술연구원) ;
  • 권용형 (부경대학교 재료공학과) ;
  • 박화순 (부경대학교 재료공학과) ;
  • 강정윤 (부산대학교 금속공학과)
  • 발행 : 2000.04.01

초록

The hydrogen attack characteristics of 3Cr-1Mo-V steel as simulated weld heat affected state were studied in this paper. The hydrogen attack susceptibility was evaluated by the ratios of Charpy impact absorbed energy at 0℃({TEX}$vE_{0} {HA}_/vE_{0}${/TEX}) and reduction of area by tensile test({TEX}$RA_{HA}/RA${/TEX}) before and after exposure to hydrogen at 600℃ under 450kgf/㎠ for 300hr. The values of {TEX}$vE_{0} {HA}_/vE_{0}${/TEX} and {TEX}$RA_{HA}/RA${/TEX} were aggravated as the peak temperature of the simulated heat affected zone(HAZ) raised. These results were due to the increase of the possession of bubbles along the grain boundaries, which were resulted in the reduction of grain boundary area to be precipitated carbides due to grain coarsening and the carbon dissolved in the martensite-austenite constituent near by the prior austenite grain boundary. The possession ratio of methane bubbles formed along prior austenite grain boundaries were increased with raising the peak temperature.

키워드

참고문헌

  1. API Publication 941(2nd Edition) Steels for Hydrogen Service at Elevated Temperatures and Pressure in Petroleum Refineries and petrochemical Plants American Petroleum Institute
  2. Material Performance no.August High Temperature Hydrogen Demage in Petroleum Refinery Equipment G. Scorell;M. J. Humpheries
  3. Corrosion v.17 hydrogen Service Failures of Welds with Insufficient Alloy Content R. W. Manuel
  4. Welding International v.8-11 Metallographic investigation of M-a constituent deterioration and improvement of HAZ toughness in 780 and 980MPa class HSLA steels welded with high heat inputs H. Okada(et al.)
  5. Metall. Trans. v.2 Martensite and Retained Austenite in Hot-Rolled, Low-carbon Bainitic Steels V. Biss;R. L. Cryderman
  6. 鐵と鋼 v.64 no.3 炭素鋼および低合金鋼の水素侵食における氣泡の發生と成長 酒井;梶
  7. 日本製鋼所技報 v.17 高壓反應筒の機械的性質について 淸水;山形
  8. 日本製鋼所室蘭製作所硏究報告 v.37 no.28 メタノ-ル變性反應筒事故調査報告書 日本製鋼所
  9. 鐵と鋼 v.46 製油裝置における鋼材の水素脆化 長谷川;藤永
  10. 高溫高壓水素侵害事故例の收集と整理 日本材料學會 腐食防食部門委員會
  11. 鐵と鋼 v.73 1/2Mo鋼溶接部の水素アタック限界溫度におよばす溶接後熱處理の影響 千葉隆一;大西敬三;石井邦雄;前田啓吉
  12. 鐵と鋼 v.71 no.14 21/4Cr-1Mo 鋼の水素アタックにおよばす炭素の影響 千葉
  13. 鐵と鋼 v.72 no.1 B 添加 Cr-Mo鋼の水素侵食性におよばすCr, Vの影響 石黑;大西;渡
  14. 鐵と鋼 v.71 21/4Cr-1Mo および 3Cr-1Mo 鋼における水素侵食限界條件の推定 酒井
  15. 溶接學會誌 v.50 高張力鋼のM-A Constituentとじん性 平井