Effect of Welding Condition on Microstructure of Transient Zone in Overlay Weld of 3Cr-1Mo Steel/STS-309L

3Cr-1Mo강/STS-309L 오버레이 용접부의 천이영역 조직에 미치는 용접조건의 영향

  • Published : 2000.04.01

Abstract

Recently developed Austenite stainless steel,309L was to overlay on 3Cr-1Mo-V-Ti-B steels, using Electroslag welding process, which wide electrodes were adopted. Transition region in welding interlayer relating to disbonding crack was investigated. Also. the effect of welding condition on the width of transition region and coarsening grains of the austenite were studied.1) With increasing welding speed the width of martensite at transient region was increased, but the amount of delta ferrite in weld metal was reduced, being fine grained.2) The form of martensite at the transition region was occured by reversible transition region, leading to increasing Ms point.3) With increasing welding speed, the grain of austenite formed at the welding interface was finer. With increasing welding current under the same welding speed, the grain size of the austenite was finer. At high current, original grain size of the austenite is coarse, but the austenite has fine grains because the austenite was transformed to martensite during cooling.4) In the case of high welding speed, the width of martensite at the welding interface was increased, but the grain size of austenite at the welding interface was finer. This indicates that the inhibition of disbonding crack may be achieved through dispersening fine carbides in the grain boudary.(Received August 3, 1999)

Keywords

References

  1. 日本製鋼所技報 v.38 最近における壓力容器の設計製作技術 佐伯;田原;藤岡;德田;美馬
  2. 高壓ガス v.13 no.11 高溫高壓水素による壓力容器の損傷對策 渡;大西;千葉
  3. 壓力技術 v.18 no.5 オ-ステナイト系ステンレス容接金屬の水素ぜい化 渡;大西;千葉
  4. 溶接學會誌 v.54 no.3 剝離龜裂の展望 大西
  5. The Japan Steel Works, Muroran, Japan Technical Data Sheet of 3Cr-1Mo-1/4V-Ti-B Steel for Elevated Temperature Applications Anon
  6. 日本金屬學會會報 v.20 no.3 低合金鋼における燒もどし脆化の關聯性 村上;大西
  7. 日本溶接協會 第118回 化學機械鎔接委資料 壓力容器におけるステンレスパレイ部の水素による剝離とその防止法 酒井;淺見;高田;田中
  8. ASTM/MPC., Conference Hydrogen induced disbanding of stainless weld overlay found in hydro-desulfurizing reactor J. Watanabe;K. Ohnishi(et al.)
  9. Corrosion science v.15 no.6 Hydrogen transport in authentic stainless Steel M. R. Ruthan;R. G. Derrick
  10. 日本溶接學會講演槪要集 v.35 ステンレス鋼オ-バレイ溶接部の性狀 富士;島埼;工藤;眞野;高橋
  11. 溶接學會論文集 v.4 no.2 ステンレス鋼オ-バレイ溶接部のはく離 びに炭化物の性狀 富士;工藤;高橋
  12. 溶接學會論文集 v.1 no.3 ステンレス鋼オ-バレイ溶接部のはく離抵抗性およぼす溶接條件の影響 大西
  13. 溶接學會誌 v.4 no.2 溶接熱影響部の結晶粒粗大化に關한する硏究(第1報) 井川;新;大重;野井
  14. 溶接學會誌 v.44 no.2 溶接熱影響部の結晶粒粗大化に關한する硏究(第2報) 井川;新;大重;野井
  15. 日本溶接學會論文集 v.2 no.3 オ-ステナイト系ステンレス鋼オ-バレイ溶接部における水素 剝離割れの防止 菊田;荒木;米田;野;西川
  16. 溶接學會論文集 v.4 no.2 水素を吸藏したステンレス鋼オ-バレイ溶接部境界部の强度 富士;工藤;高橋