전기화학회지 (Journal of the Korean Electrochemical Society)
- 제3권3호
- /
- Pages.136-140
- /
- 2000
- /
- 1229-1935(pISSN)
- /
- 2288-9000(eISSN)
DOI QR Code
슬러리 코팅법에 의한 스테인레스 스틸 표면에서의 알루미늄 확산막 제조 및 용융탄산염 내에서의 내식 특성 연구
A Study on Protection of Stainless Steel Substrate against Corrosion in Molten Carbonate by Formation of Aluminum Diffusive Layer Using a Slurry Coating Method
-
남석우
(한국과학기술연구원 전지 연료전지연구센터) ;
- 황응림 (한국과학기술연구원 전지 연료전지연구센터) ;
- 아나톨리 마가뉵 ;
- 홍명자 (한국과학기술연구원 전지 연료전지연구센터) ;
-
임태훈
(한국과학기술연구원 전지 연료전지연구센터) ;
-
오인환
(한국과학기술연구원 전지 연료전지연구센터) ;
- 홍성안 (한국과학기술연구원 전지 연료전지연구센터)
-
Nam S. W.
(Battery and Fuel Cell Research Center, Korea Institute of Science and Technology) ;
- Hwang E. R. (Battery and Fuel Cell Research Center, Korea Institute of Science and Technology) ;
- Magtanyuk A. P. (Russia People's Friendship University) ;
- Hong M. Z. (Battery and Fuel Cell Research Center, Korea Institute of Science and Technology) ;
-
Lim T. H.
(Battery and Fuel Cell Research Center, Korea Institute of Science and Technology) ;
-
Oh I. -H.
(Battery and Fuel Cell Research Center, Korea Institute of Science and Technology) ;
- Hong S. -A. (Battery and Fuel Cell Research Center, Korea Institute of Science and Technology)
- 발행 : 2000.08.01
초록
용융탄산염 연료전지의 분리판 재료로 사용되는 스테인레스 스틸은 고온 용융탄산염 분위기에서 부식이 심각하여 일반적으로 표면에 알루미늄 확산막을 코팅함으로써 내식성을 향상시켜 사용하고 있다. 본 연구에서는 기존 방법에 비해 보다 경제적인 슬러리 페인팅 및 열처리에 의한 알루미늄 확산막 형성 방법을 고안하여, 스테인레스 스틸 시편 표면에 알루미늄 확산막을 코팅하고, 산화 분위기의 용융탄산염에서 부식 실험을 수행하였다.
A stainless steel separator for a molten carbonate fuel cell is usually coated with aluminum diffusive layer to protect its surface against corrosion by the molten carbonate at high temperatures. In this study, a relatively simple method was devised to form the aluminum diffusive layer on a stainless steel substrate. Slurry coating of aluminum on the substrate followed by heat treatment under reducing atmosphere at