Journal of the Korean Electrochemical Society (전기화학회지)
- Volume 3 Issue 3
- /
- Pages.136-140
- /
- 2000
- /
- 1229-1935(pISSN)
- /
- 2288-9000(eISSN)
DOI QR Code
A Study on Protection of Stainless Steel Substrate against Corrosion in Molten Carbonate by Formation of Aluminum Diffusive Layer Using a Slurry Coating Method
슬러리 코팅법에 의한 스테인레스 스틸 표면에서의 알루미늄 확산막 제조 및 용융탄산염 내에서의 내식 특성 연구
- Nam S. W. (Battery and Fuel Cell Research Center, Korea Institute of Science and Technology) ;
- Hwang E. R. (Battery and Fuel Cell Research Center, Korea Institute of Science and Technology) ;
- Magtanyuk A. P. (Russia People's Friendship University) ;
- Hong M. Z. (Battery and Fuel Cell Research Center, Korea Institute of Science and Technology) ;
- Lim T. H. (Battery and Fuel Cell Research Center, Korea Institute of Science and Technology) ;
- Oh I. -H. (Battery and Fuel Cell Research Center, Korea Institute of Science and Technology) ;
- Hong S. -A. (Battery and Fuel Cell Research Center, Korea Institute of Science and Technology)
- 남석우 (한국과학기술연구원 전지 연료전지연구센터) ;
- 황응림 (한국과학기술연구원 전지 연료전지연구센터) ;
- 아나톨리 마가뉵 ;
- 홍명자 (한국과학기술연구원 전지 연료전지연구센터) ;
- 임태훈 (한국과학기술연구원 전지 연료전지연구센터) ;
- 오인환 (한국과학기술연구원 전지 연료전지연구센터) ;
- 홍성안 (한국과학기술연구원 전지 연료전지연구센터)
- Published : 2000.08.01
Abstract
A stainless steel separator for a molten carbonate fuel cell is usually coated with aluminum diffusive layer to protect its surface against corrosion by the molten carbonate at high temperatures. In this study, a relatively simple method was devised to form the aluminum diffusive layer on a stainless steel substrate. Slurry coating of aluminum on the substrate followed by heat treatment under reducing atmosphere at
용융탄산염 연료전지의 분리판 재료로 사용되는 스테인레스 스틸은 고온 용융탄산염 분위기에서 부식이 심각하여 일반적으로 표면에 알루미늄 확산막을 코팅함으로써 내식성을 향상시켜 사용하고 있다. 본 연구에서는 기존 방법에 비해 보다 경제적인 슬러리 페인팅 및 열처리에 의한 알루미늄 확산막 형성 방법을 고안하여, 스테인레스 스틸 시편 표면에 알루미늄 확산막을 코팅하고, 산화 분위기의 용융탄산염에서 부식 실험을 수행하였다.