References
- Lucas, G. E., 1990, 'Review of Small Specimen Test Techniques for Irradiation Testing,' Metallurgical Transactions A, Vol. 21A, pp. 1105-1119 https://doi.org/10.1007/BF02698242
- 박종진, 유효선, 정세희, 1996, '고온부재의 재질열화에 따른 응력부식균열 평가에 관한 연구,' 대한기계학회논문집 A, 20 권, 4 호, pp. 73-80
- Manahan, M. P., 1983, 'New Postirradiation Mechanical Behavior Test - The Miniaturized Disk Bend Test,' Nuclear Technology, Vol. 63, pp. 295-315
- Cheon, J. S. and Kim, I. S., 1996, 'Initial deformation during small punch testing,' Journal of Testing and Evaluation, Vol. 24, pp. 255-262
- Foulds, J. R. et al., 1995, 'Small Punch Testing for Fracture Toughness Measurement,' Electric Power Research Institute Report, EPRI TR-105130
- Kubo, S., 1988, 'Inverse Problems Related to the Mechanics and Fracture of Solids and Structures,' JSME International Journal, Series I, Vol. 31, pp. 157-166
- Michino, M., Tanaka,M. and Kitaoka, T., 1996, 'Determination of Flow Stress by Inverse Analysis Using FEM,' Journal of the JSTP, Vol. 37, pp. 219-224
- Osakada, K., Shirashi,M., Muraki, S. and Tokuoka, M., 1991, 'Measurement of Flow Stres by the Ring Compression Test,' JSME International Journal, Series I, Vol. 34, pp. 312-318
- 천진식, 1998, '소형펀치 시험과 최적화 기법에 의한 재료의 유동응력 예측,' 한국중공업 기술제안 보고서
- Kirkpatrick, S., Gelatt, C. and Vecchi, M., 1983, 'Optimization by Simulated Annealing,' Science, Vol. 220, pp. 671-680 https://doi.org/10.1126/science.220.4598.671
- Moerder, D. D. and Pamadi, B. N., 1994, 'Constrained Minimization of Smooth Functions Using a Genetic Algorithm,' NASA Technical Paper 3329
- Yoshimura, S., Hishida, H. and Yagawa, G., 1993, Parameter Determination of Inelastic Constitutive Equations by Means of Neural Network,' Transactions of the Japan Society of Mechanical Engineering, Part A, Vol. 59, pp. 518-525
- Furukawa, T. and Yagawa, G., 1997, 'Inelastic Constitutive Parameter Identification Using an Evolutionary Algorithm with Continuous Individuals,' International Journal of Numerical Methods and Engineering, Vol. 40, pp. 1071-1090 https://doi.org/10.1002/(SICI)1097-0207(19970330)40:6<1071::AID-NME99>3.0.CO;2-8
- Rao, S. S., 1996, Engineering Optimization: Theory and Practice, John Wiley & Sons, Inc., New York
- Starck, V., 1996, Implementation of Simulated Annealing Optimization Method for APLAC Circuit Simulator, M.S. thesis, Helsinki University of Technology
- Hagan, M. T., Demuth H. B. and Beale, M., 1996, Neural Network Design, PWS Publishing Company, Boston
- Yoshimura, S., Matsuda, A. and Yagawa, G., 1996, 'New Regularization by Transformation for Neural Network Based Inverse Analyses and Its Application to Structure Identification,' International Journal of Numerical Methods and Engineering, Vol. 39, pp. 3953-3968 https://doi.org/10.1002/(SICI)1097-0207(19961215)39:23<3953::AID-NME31>3.0.CO;2-O
- ABAQUS/Standard Version 5.7, 1997, Hibbit, Karlsson and Sorensen Inc.
- Dieter, G. E., 1996, Mechanical Metallurgy, McGraw-Hill Book Company, New York
- Demuth, H. B. and Beale, M., 1994, Neural Network Toolbox, The Mathworks Inc.
- Scale J. A. and Smith, M. L., 1996, Introductory Geophysical Inverse Theory: Part I, Samizdat Press
- Schnur, D. S. and Zabaras, N., 1992, 'An Inverse Method for Determining Elastic Material Properties and a Material Interface,' International Journal of Numerical Methods and Engineering, Vol. 33, pp. 2039-1057 https://doi.org/10.1002/nme.1620331004
- Haggag, F.M., 1993, 'In-Situ Measurements of Mechanical Properties Using Novel Automated Ball Identation System,' ASTM STP 1024, pp. 27-44