Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Reinforcing Characteristics on Volume and Shape of Ductile Short-Fiber in Brittle Matrix Composites

취성기지 복합재료에서 연성 단섬유의 함유량 및 형상에 관한 보강특성

  • Published : 2000.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

The reinforcing effects of ductile short-fiber reinforced brittle matrix composites are studied by, measuring flexural strength, fracture toughness and impact energy as functions of fiber volume fraction and length. The parameters of fracture mechanics, K and J are applied to assess fracture toughness and bridging stress. It is found that fracture toughness is greatly, influenced by the bridging stress ill which fiber pull-out is occur. For the reinforcing effects as functions of fiber volume fraction($V_f$ = 1, 2, 3 %) and length(L = 3, 6. 10cm), the flexural strength is maximum at $V_f$ = 1% and both fracture toughness.

Keywords

References

  1. Banthia, N. and Sheng, J., 1995, 'Micro-fiber Reinforced Cement Composites. II. Flexural Response and Fracture Studies,' Canadian Journal of Civil Engineering, Vol. 22, pp. 668-682
  2. Mingguang Zhu, Wetherhold, Rober C. and Chung, D. D. L., 1997, 'Evaluation of The Interfacial Shear in A Discontinuous Carbon Fiber/Mortar Matrix Composite,' Cement and Concrete Research, Vol. 27, No.3, pp. 437-451 https://doi.org/10.1016/S0008-8846(97)00013-6
  3. Lin. Zhong and Li. C. Victor, 1997, 'Crack Bridging in Fiber Reinforced Cementitious Composites with Slip-Hardening Interfaces,' Journal of Mechanics and Physics of Solids, Vol. 45, No.5, pp. 763-787 https://doi.org/10.1016/S0022-5096(96)00095-6
  4. Li, V. C., Kanda, T. and Lin, Z., 1998, 'Influence of FiberlMatrix Interface Properties on Complementary Energy and Composite Damage Tolerance,' Key Engineering Materials, Vol. 145-149, pp. 456-472
  5. Rice, J. R., Paris, P. C. and Merkle, J. G., 1973, 'Some Further Aspects of J-integral Analysis and Estimates,' ASTM STP 536, American Society of Testing and Material, Philadelphia, pp. 231-245
  6. Lee, D. J., 1995, 'Simple Method to Measure The Crack Resistance of Ceramic Materials,' Journal of Materials Science, Vol. 30, No. 18, pp. 4617-4622 https://doi.org/10.1007/BF01153070
  7. Malvar, L. J. and Warren, G. E., 1987, 'Fracture Energy for Three-Point-Bend Tests on Single-Edge-Notched Beams,' Materials and Structures, Vol. 20, pp. 448-454 https://doi.org/10.1007/BF02472495
  8. Kupfer, H., Hilsdorf, Hurbert. K. and Hurbert Rusch, 1969, 'Behavior of Concrete under Biaxial Stress,' ACI Materials Journal, Proceedings Vol. 66, No.8, pp. 656-666
  9. Rice, J. R., r Paris, P. C. and Merkle, J. G., 1973, 'Some Further Aspects of J-integral Analysis and Estimates,' ASTM STP 536, American Society of Testing and Material, Philadelphia, pp. 231-245
  10. Annual Handbook of ASTM Standard, 1995, 'Plane-Strain Fracture Toughness of Metallic Materials,' ASTM E399-90, pp. 412-442
  11. Annual Handbook of ASTM Standard, 1995, 'Standard Test Method for $J_{IC}$, A Measure of Fracture Toughness,' ASTM E 813-89, pp. 646-653
  12. Annual Handbook of ASTM Standard, 1995, 'Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading),' ASTM C 293-94, pp. 166-168
  13. Tada, H., Paris, P. C. and Irwin, G. R., 1973, The Stress Analysis of Cracks Handbook, Del Research Corporation, Hellertown, PA
  14. Sumpter, J. D. G., Hackett, E. M., Schwalbe, K. H. and Dodds, R. H., 1993, 'An Experimental Investigation of the T-stress Approach. In Constraint Effects in Fracture,' ASTM STP1171, Jr. (eds.), Indianapolis, pp. 492-502
  15. Jenq, Y. S. and Shah, S. P., 1988, 'Mixed mode Fracture of Concrete,' International Journal of Fracture, Vol. 38, pp. 123-142