참고문헌
- Clyne, T.W. and Withers, P.J., 1993, An Introduction to Metal Matrix Composites, Cambridge University Press, Cambridge
- Rohatgi, P, 1991, 'Cast Aluminum-Matrix Composites for Automotive Applications,' J. Minerals, Vol.43, No.4, pp. 10-15
- Srivatsan, T.S., 1992, 'The Low-Cycle Fatigue Behavior of an Aluminum-Alloy-Ceramic- Particle Composite,' Int. J. Fatigue, Vol.14, pp. 173-182 https://doi.org/10.1016/0142-1123(92)90371-I
- Wang, L., Sun, Z.M., Kobayashi, T., Toda, H. and Wang, Z.G., 1996, 'Cyclic Deformation and Low Cycle Fatigue Behavior in a 6061 Al/22% Vol. SiC Whisker Composite,' Materials Transactions, JIM, Vol. 37, pp. 763-768
-
Xia, Z., Ellyin, F. and Meijer, G., 1997, 'Mechanical Behavior of
$Al_2O_3$ -Particle-Reinforced 6061 Aluminum Alloy under Uniaxial and Multiaxial Cyclic Loading,' Composites Science and Technology, Vol. 57, pp. 237-248 https://doi.org/10.1016/S0266-3538(96)00135-2 - Srivatsan, T.S. and Lavernia, E.J., 1993, 'Effects of Microstructure on the Strain-controlled Fatigue Failure Behavior of an Aluminurnalloy/Ceramic-particle Composite,' Composites Science Technology, Vol. 49, pp. 303-313
- Vyletel, G.M., Allison, J.E. and Sachdev, A.K., 1993, 'The Influence of Matrix Microstructure and TiC Reinforcement on the Cyclic Response and Fatigue Behavior of 2219 Al,' Metallurgical Transactions A, Vol. 24A, pp. 2545-2557
- Shang, J.K. and Ritchie, R.O., 1989, 'On the Particle-Size Dependence of Fatigue-Crack Propagation Thresholds in SiC-Particulate-Reinforced Aluminum-Alloy Composites: Role of Crack Closure and Crack Trapping,' Acta Metall., Vol. 37, No. 8, pp. 2267-2278
- Han, N;L., Wang, Z.G. and Sun, L., 1995, 'Effect of Reinforcement Size on Low Cycle Fatigue Behavior of SiC Particle Reinforced Aluminum Matrix Composites,' Scripta Metalturgica et Materialia, Vol. 33, No. 5, pp. 781-787 https://doi.org/10.1016/0956-716X(95)00281-Y
- Hu, J., Kumai, S., Higo, Y. and Nunomura, S., 1993, 'The Effect of Microstructural Characteristics on Fatigue Crack Growth in SiC Particulate-Reinforced Cast Aluminum Alloy Composites,' Fatigue '93, pp. 1123-1128
- 양유창, 송정일, 봉하동, 한경섭, 1995, '단섬 유강화 금속복합재료의 반복적 변형 및 피로특성,' 대한기계학회논문집, 제19권, 6호, pp. 1422-1430
- 최영근, 이택순, 이문환, 1995, 'SiC 업자강화 알루미늄기 복합재료의 표면미소 피로균열의 발생 및 진전거동,' 대한기계학회논문집, 제19 권, 제11호, pp. 2787-2796
- 서영호, 강충길, 1996, '용탕제조법에 의하여 제조된 SiCp/Al 복합재료의 2차성형가공이 기계적 성질에 미치는 영향,' 대한기계학화논문집 (A), 제20권, 제11호, pp. 3474-3490
- Sasaki, M., Lawson, L. and Meshii, M., 1994, 'Low-Cycle Fatigue Properties of a SiC Whisker-Reinforced 2124 Aluminum Alloy,' Metallurgical Transactions, Vol. 25A, pp. 2265-2274 https://doi.org/10.1007/BF02652326
- Christman, T. and Suresh, S., 1988, 'Microstructural Development in an Aluminum Alloy-SiC Whisker Composite,' Acta Metall., Vol. 36, No. 7, pp. 1691-1704 https://doi.org/10.1016/0001-6160(88)90236-2
- Golos, K. and Ellyin, F., 1988, 'A Total Strain Energy Density Theory for Cumulative Fatigue Damage,' J. Pressure Vessel Technology, Vol. 110, pp. 36-41