DOI QR코드

DOI QR Code

Optimum Design of Co-cured Steel-Composite Tubular Single Lap Joints

동시경화 강철-복합재료 원형 단일 겹치기 조인트의 최적설계

  • Published : 2000.05.01

Abstract

In this paper, a failure model for co-cured steel-composite tubular single lap joints has been proposed incorporating the nonlinear mechanical behavior of steel adherends and different failure mode s such as steel adherend failure and composite adherend failure. The characteristics of the co-cured steel-composite tubular single lap joint were investigated with respect to the test temperature, the stacking sequence of composite adherend, the thickness ratio of steel adherend to composite adherend, and the scarf ratio of steel adherend. Thus, the optimum design method for the co-cured steel-composite tubular single lap joint was suggested.

Keywords

References

  1. Mallick, P. K., 1988, Fiber-Reinforced Composites, Marcel Dekker, Inc., pp. 214-248
  2. Kinloch, A. J., 1987, Adhesion and Adhesives, Champman and Hall Ltd., New York, pp. 2-3
  3. Kinloch, A. J., 1987, Adhesion and Adhesives, Champman and Hall Ltd., New York, 1987, pp. 229-230
  4. Bolger, J. C. (1973) Treatise on Adhesion and Adhesives, Vol. 3 (ed. R. I. Patrick), Marcel Dekker, New York, p. 1
  5. 김진국, 조덕현, 이대길, 1999, '축방향 하중을 받는 튜브형 단일겹??접착 조인트의 열적 특성에 관한 연구,' 대한기계학회논문집 제23권 제 10호,pp. 1776-1787
  6. Schjeldrup, H. C. and Jones, W. B., 1978, Adhesives Age 21(2), p. 35
  7. Kinloch, A. J. and Young, R. J., 1983, Fracture Behavior of Polymers Applied Science Pub., London, p. 286
  8. Jeong, K. S., 1994, Flexspline for a Hamonic Drive-Design, Manufacturing and Evaluation, Ph. D. Dissertation, Department of Precision Engineering and Mechatronics, Korea Advanced Institute of Science and Technology
  9. Rao, M. D. and He, S., 1993, 'Dynamic Analysis and Design of Laminated Composite Beams with Multiple Damping Layers,' AIAA Journal, 31(4) : pp. 736-745
  10. Gerst, D., Rao, M. D. and He, S., 1992. 'Damping of Co-cured Composite Structures Incorporating Viscoelastic Materials,' Proceedings of the Damping of Multiphase Inorganic Materials Symposium, ASM Materials Week, Chicago, IL, pp. 85-93
  11. He, S. and Rao, M. D.,1994, 'Residual Stresses and Delamination Problems Induced by Co-curing of Damped Composite Laminates,' Journal of Composite Materials, Vol. 28, pp. 112-129
  12. Choi, J. H. and Lee, D. G.,1997, 'Torque Capacity of Co-cured Tubular Lap Joints,' Journal of Composite Materials, Vol. 31, No. 14, pp. 1381-1396
  13. Lee, S. W., Lee, D. G. and Jeong, K. S.,1997, 'Static and Dynamic Torque Characteristics of Composite Cocured Single Lap Joints,' Journal of Composite Materials, Vol. 31, pp. 2188-2201 https://doi.org/10.1177/002199839703102104
  14. Cho, D. H. and Lee, D. G.,1998, 'Manufacturing of Co-cured Composite Aluminum Shafts with Compression during Co-Curing Operation to Reduce Residual Thermal Stresses,' Journal of Composite Materials, Vol. 32, pp. 1221-1241 https://doi.org/10.1177/002199839803201205
  15. Cho, D. H., Lee, D. G. and Choi. J. H., 1997, 'Manufacture of One-Piece Automotive Drive Shafts with Aluminum and Composite Materials,' Composite Structures, Vol. 38, pp. 309-319 https://doi.org/10.1016/S0263-8223(97)00065-2
  16. 조덕현, 이대길,1999, '원통형 복합재료 동시경화 조인트의 열적 특성에 관한 연구,' 대한기계 학회 논문집 제23권 제9호, pp. 1577-1589
  17. Chamis, C. C. and Sinclair, J. H., 1982, 'Durability/Life of Fiber Composites in Hygrothermal mechanical Environments,' in I. M. Diniel (ed.), Composite Materials: Testing and Design (Sixth Conference), ASTM STP 787, pp. 498-512
  18. Gibson, R. F., 1994, Principles of Composite Material Mechanics, McGraw-Hill, Inc., New York, pp. 132-144
  19. ASM HANDBOOK, 1999, Vol. 20 Materials Selection and Design, ASM International, pp. 370-371