Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Comparative Study on Crack Tip Opening Displacment ${\delta}_5$ R-Curve and ${\delta}_{BS}$ R-Curve

균열선단 열림변위 {\delta}_5 R-곡선과 {\delta}_{BS} R-곡선의 비교연구

  • Published : 2000.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Since the examination of CTOD problem revealed that the discrepancy among CTOD's was a matte., of definition, the relationships among parameters based on different definitions have been studied Particularly, the relationship between $\sigma$BS R-curve based on BS 7448 and R-curve based on the recently introduced $\sigma$5 parameter was investigated in this research. For the comparison, compact tension specimens of used 1Cr-0.5Mo steel, heat treated 1Cr-0.5Mo steel to mimic the new one, A12024-T6, and A12024-T351 were prepared and tested. Consequently, the relationship between $\sigma$5 and $\sigma$BS R-curves for tested materials were established by shifting the rotational center which could determined by rotation factor and ligament size.

Keywords

References

  1. Schwalbe, K. H., Heerens, J., Hellmann, D., and Cornec, A., 1986, 'Relationships Between Various Definitions of the Crack Tip Opening Displacement,' The Crack Tip Opening Displacement in Elastic-Plastic Fracture Mechanics Workshop on CTOD Methodology, Schwalbe, K. H. Ed., Springer Verlag, pp. 133-153
  2. Hellmann, D., Schwalbe, K. H., 1986, 'On the Experimental Determination of CTOD Based R-Curves,' The Crack Tip Opening Displacement in Elastic-Plastic Fracture Mechanics Workshop on CTOD Methodology, Schwalbe, K. H. Ed., Springer Verlag, pp. 115-132
  3. Schwalbe, K. H., 1986, 'The Prediction of Failure Situations Using the CTOD Concept Based on the Engineering Treatment Model(ETM),' The Crack Tip Opening Displacement in Elastic-Plastic Fracture Mechanics Workshop on CTOD Methodology, Schwalbe, K. H. Ed., Springer Verlag, pp. 315-340
  4. Heerens, J., Schwalbe, K. H., Nix, C, 1993, 'Influence of Specimen Size on J-, Jm- and ${\delta}_5$ -R-Curves for Side-Grooved Compact Tension Specimens,' Constraint Effects in Fracture, ASTM STP 1171, Hacket, E. M., Schwalbe, K. H. and Dodds, R. H., Eds., American Society for Testing and Materials, Philadelphia, pp. 429-472
  5. Saxena, A, Dogan, B, Schwalbe, K. H., 1994, 'Evaluation of the Relationship Between $C^*$ ${\delta}_5$ and ${\delta}_t$ during Creep Crack Growth,' ASTM STP 1207, Landes, J. D., McCabe,D. E., and Boulet, J. A. M., Eds., American Society for Testing and Materials, Philadelphia, pp. 510-526
  6. Schwalbe, K. H. and Hellmann, Dicher, 1981, 'Application of the Electrical Potential Method to Crack Length Measurements Using Johnson's Formula,' Journal of testing and evaluation, Vol.9, No.3, pp. 218-221 https://doi.org/10.1520/JTE11560J
  7. Johnson, H. H., 1965, 'Calibrating the Electrical Potential Method for Studying Slow Crack Growth,' Material Research and Standard, Vol.5, No.9, pp. 442-445
  8. BS 7448, 1991, 'Fracture Mechanics Toughness Test,' British Standards Institution
  9. ASTM 1820, 1996, 'Standard Test Method for Measurement of Fracture Toughness,' ASTM Philadelphia
  10. Gordon, J., R., Neale, B., K. and Wang, Y. Y., 1995, 'A Comparison of J and CTOD as Elastic-Plastic Fracture Characterizing Parameters,' ASTM STP 1244, pp. 425-444
  11. Kannien, M., F., and Popelar, C, H., 1985, Advanced Fracture Mechanics, Oxford University Press, New York, pp. 367-370