오스템퍼링 처리한 구상흑연주철(ADI)의 내마모성에 미치는 합금원소의 영향에 관한 연구

Effect of Alloying Elements on the Wear Resistance of Austempered Ductile Iron

  • 이상학 (동아대학교 공과대학 금속공학과) ;
  • 김홍범 (동아대학교 공과대학 금속공학과) ;
  • 김종철 (동아대학교 공과대학 금속공학과) ;
  • 천병욱 (동아대학교 공과대학 금속공학과) ;
  • 김창규 (부경대학교 공과대학 금속공학과) ;
  • 최창옥 (동아대학교 공과대학 금속공학과)
  • 발행 : 1999.02.20

초록

A series of investigations for Austempered Ductile Iron (ADI) castings were carried out by using the specimens with various chemical compositions and heat treatment conditions. The rolling wear characteristics of alloyed austempered ductile irons under an unlubricated dry rolling condition was evaluated by the Amsler type test with 9.09% sliding ratio. Generally, the wear amount was increased with the austempering temperature and decreased when the hardness of the matrix was higher. The alloying elements also influenced the austempering reaction, the microstructure and the mechanical properties. In this study, the mechanical properties (i.e.) ultimate tensile strength (UTS), hardness, elongation) and the wear resistance are analysed to show the relationship between the alloying elements and the austempering temperatures. Mo, Cu and Ni are alloyed individually or in combination. It has been found that when Cu and Ni alloyed individually to a casting, the wear amount is increased than others with elements alloyed in combination. The amount of rolling wear loss was decreased when Mo was alloyed in cast iron, individually or in combination.

키워드