DOI QR코드

DOI QR Code

Aerodynamic stability for square cylinder with various corner cuts

  • Choi, Chang-Koon (Department of Civil Engineering, Korea Advanced Institute of Science and Technology(KAIST)) ;
  • Kwon, Dae-Kun (Department of Civil Engineering, Korea Advanced Institute of Science and Technology(KAIST))
  • Published : 1999.09.25

Abstract

The flow around a structure has been an important subject in wind engineering research. There are various kinds of unstable aerodynamic phenomena with regard to a bluff body. In order to understand the physical mechanism of aerodynamic and aeroelastic instability of a bluff body, the relations between the flow around structures and the motion of body with various section shapes should be investigated. Based on a series of wind tunnel tests, this paper addresses the aerodynamic stability of square cylinder with various corner cuts and attack angles in the uniform flow. The test results show that the models with corner cut produced generally better behaviour for the galloping phenomenon than the original section. However, the corner cut method can not prevent the occurrence of the vortex-induced vibration(VIV). It is also shown that as the attack angle changes, the optimum size of corner cut changes also. This means that any one specific size of corner cut which shows the best aerodynamic behaviour throughout all the cases of attack angles does not exist. This paper presents an intensive study on obtaining the optimum size of corner cut for the stabilization of aerodynamic behaviour of cylinders.

Keywords

References

  1. Choi, C.K., Ryu, W.J., Kwon, D.K., (1998), "Comparison between the CFD and wind tunnel experiment for tall building with various corner shapes" , International Conference on Tall Building, Hong Kong, December.
  2. Choi, C.K, Kwon, D.K., (1998), "Wind tunnel blockage effects on aerodynamic behavior of bluff body", Wind and Structures, 1(4), 351-364, December. https://doi.org/10.12989/was.1998.1.4.351
  3. Choi, C.K., Kwon, D.K., (1999), "An aerodynamic characteristics study on various section shapes of rectangular cylinder" , Proceedings of WEIK Symposium, Korea.
  4. Ichikawa, Y., etc., (1997), "Aerodynamic characteristics of a rectangular prism versus of attack angle" , Japanese J. of Wind Engineering, 71, April.
  5. Inoue, H., Mushiake, H., Hirano, H., Ikenouchi, M. (1984), "Aerodynamic damping effect of side plates on suspension bridge tower", Japanese J. of Wind Engineering.
  6. Kawai, H., (1993), "Effect of wind direction on characteristics of vortex induced vibration and galloping of tall buildings", Japanese J. of Wind Engineering, 55, May.
  7. Kawai, H., (1993), "Effect of angle of attack on vortex induced vibration and galloping of tall buildings in smooth and turbulent boundary layer flows", The Third Asia-Pacific Symposium on Wind Engineering, Hong Kong, 13-15 December.
  8. Kawai, H., (1997), "Wind induced vibrations of tall buildings", 7th ICCCBE, 2317-2328, Korea, August.
  9. Kawai, H., Takaguchi, M., Nakamura, T., (1995), "Factor of reduction of vortex-induced vibration with variation of corner modification" , Japanese J. of Wind Engineering, 63, April.
  10. Kijewski, T., Kareem, A., Tamura, Y., (1998), "Overview of methods to mitigate the response of windsensitive structures" , SEWC, T179-1
  11. Koenig, K., Roshko, A. (1985), "An experimental study of geometrical effects on the drag and flow field of two bluff bodies separated by a gap" , Journal of Fluid Mechanics, 156, 167-204. https://doi.org/10.1017/S002211208500204X
  12. Kwok, K.C.S., Isyumov, N., (1998), "Aerodynamic measures to reduce the wind-induced response of building and structures" , SEWC, T179-6.
  13. Miyagi, T., Tamura, T., (1997), "Effect of corner shape of a 2D square cylinder on pressure distributions" , Japanese J. of Wind Engineering, 71, April.
  14. Nanjo, M., Ushino, M., (1990), "Wind tunnel experiment and field observation on the rectangular cylinders with square corner cuts" , Japanese J. of Wind Engineering, 323-328.
  15. Ogawa, K., Matsumoto, M., Kitazawa, M., Yamasaki, T., (1988), "Aerodynamic stability of the tower of a long-spanned cable-stayed bridge(Higashi-Kobe Bridge)", Japanese J. of Wind Engineering, 37, 501-510.
  16. Okajima, A., Ueno, H., Abe, A., (1991), "Influence of reynolds number on flow and aerodynamic characteristics of bluff bodies with rectangular section of cut corners", Japanese J. of Wind Engineering, 49, November.
  17. Shiraish, N. etc., (1986), "On aerodynamic stability effects for bluff body rectangular cylinders by their corners cut" , Japanese J. of Wind Engineering.
  18. Shirato, H., Matsumoto, M., (1994), "Reynolds number effect on aerodynamic properties of 2-D rectangular section with corner-cut", Japanese J. of Wind Engineering, 59, May.
  19. Suda, K., Tsurumi, T., Imada, E., (1995), "Characteristics of wind induced vibration on tall building with corner cutting", Japanese J. of Wind Engineering, 63, April.
  20. Takeuchi, T., (1988), "Effect of geometrical shape on vortex-induced oscillations of bridge tower", Japanese J. of Wind Engineering, 37, 511-520.
  21. Tamura, T., Miyagi, T., (1997), "The effect of turbulence on aerodynamic forces on a square cylinder with various corner shapes", The Fourth Asia-Pacific Symposium on Wind Engineering, Australia, 14-16 July.

Cited by

  1. Numerical Investigation on the Ground Speed Effect around a Square Cylinder near the Ground vol.53, pp.1, 2007, https://doi.org/10.1080/10407780701451358
  2. The Enhancement of Aerodynamic Characteristics on Bluff Bodies near a Moving Ground vol.49, pp.3, 2006, https://doi.org/10.1299/jsmeb.49.787
  3. Aerodynamic treatments for reduction of wind loads on high-rise buildings vol.172, 2018, https://doi.org/10.1016/j.jweia.2017.11.006
  4. Investigation of passive flow control on the bluff body with moving-belt experiment vol.17, pp.2, 2016, https://doi.org/10.5139/IJASS.2016.17.2.139
  5. Wind-induced characteristics of two-edge girders for the bending degree-of-freedom vol.9, pp.6, 2005, https://doi.org/10.1007/BF02831486
  6. Aerodynamic modifications for reduction of wind loads on cross plan shaped tall building vol.33, pp.2, 1999, https://doi.org/10.12989/was.2021.33.2.123