DOI QR코드

DOI QR Code

A linear model for structures with Tuned Mass Dampers

  • 발행 : 1999.09.25

초록

In its 90 years of life, the Tuned Mass Damper have found application in many fields of engineering as a vibration reducing device. The evolution of the theory of TMDs is briefly outlined in the paper. A generalised mathematical linear model for the analysis of the response of line-like structures with TMDs is presented. The system matrices of the system including the TMDs are written in the state space as a function of the mean wind speed. The stability of the system can be analysed and the Power Spectral Density Function of any response parameter calculated, taking into account an arbitrary number of modes of vibration as well as an arbitrary number of TMDs, for any given PSDF of the excitation. The procedure can be used to optimise the number, position and mechanical properties of the damping devices, with respect to any response parameter. Due to the stationarity of the excitation, the method is well suited to structures subjected to the wind action. In particular the procedure allows the calculation of the onset galloping wind speed and the response to buffeting, and a linearisation of the aeroelastic behaviour allows its use also for the evaluation of the response to vortex shedding. Finally three examples illustrate the suggested procedure.

키워드

참고문헌

  1. Abdel-Rohman M. (1994), "Design of tuned mass dampers for suppression of galloping in tall prismatic structures", J. Sound Vib., 171(3), 289-299. https://doi.org/10.1006/jsvi.1994.1121
  2. Ayorinde E.O. and Warburton G.B. (1980), "Minimising structural vibrations with absorbers", Earthquake Engng. Struct. Dyn., 8, 219-236. https://doi.org/10.1002/eqe.4290080303
  3. Bapat V.A. and Kumaraswamy H.V. (1979), "Effect of primary system damping on the optimum design of an untuned viscous dynamic vibration absorber" , J. Sound Vib., 63, 469-474. https://doi.org/10.1016/0022-460X(79)90822-8
  4. Borino G. and Muscolino G. (1986), "Mode superposition methods in dynamic analysis of classically and non-classically damped linear systems" , Earthquake Engng. Struct. Dyn., 14, 705-717. https://doi.org/10.1002/eqe.4290140503
  5. Brock J.E. (1946), "A note on the damped vibration absorber", J. Appl. Mech. ASME, 13, A-284.
  6. Crandall S.H. and Mark W.D. (1963), Random Vibration in Mechanical Systems, Academic Press, New York.
  7. Curtis J.A. and Boykin T.R. (1961), "Response of two-degree-of freedom systems to white noise base excitation" , J. Acoust. Soc. Amer., 33, 655-663. https://doi.org/10.1121/1.1908754
  8. Den Hartog J.P. (1940), Mechanical Vibrations, McGraw-Hill, New York.
  9. Falcon K.C., Stone B.J., Simcock W.D. and Andrew C. (1967), "Optimisation of vibration absorbers: a graphical method for use on idealised systems with restricted damping", J. Mech. Engng. Sci., 9, 374-381. https://doi.org/10.1243/JMES_JOUR_1967_009_058_02
  10. Fujino Y., Warnitchai P. and Ito M. (1985), "Suppression of galloping of bridge tower using tuned mass damper", J. Fac. Engng. U. of Tokyo, 38, 49-73.
  11. Gupta Y.P. and Chandrasekaran A.R. (1969), "Absorber system for earthquake excitation", Proc. 4th World Conf. Earthquake Engng., Santiago, Chile.
  12. Jacquot R.G. and Hoppe D.L. (1973), "Optimal random vibration absorbers", J. Engng. Mech. ASCE, 99, 612-621.
  13. Jacquot R.G. (1978), "Optimal dynamic vibration absorbers for general beam systems" , J. Sound Vib., 60, 535-542. https://doi.org/10.1016/S0022-460X(78)80090-X
  14. Kaynia A.M., Veneziano D. and Biggs J. (1981) "Seismic effectiveness of tuned mass dampers", J. Struct. Eng. ASCE, 107, 1465-1484.
  15. Luft R.W. (1979), "Optimal tuned mass dampers for buildings", J. Struct. Engng. ASCE, 105, 2766- 2772.
  16. McNamara R.J. (1977), "Tuned mass dampers for buildings", J. Struct. Engng. ASCE, 103, 1785-1798.
  17. Neubert V.H. (1964), "Dynamic absorbers applied to a bar that has solid damping", J. Acoust. Soc. Amer., 36, 673-670. https://doi.org/10.1121/1.1919039
  18. Occhiuzzi A. and Ricciardelli F. (1996), "L'effetto degli smorzatori a massa accordata sulla risposta delle strutture allungate all'azione del vento" , Proc. 4th Italian Nat. Conf. Wind Engng., Trieste.
  19. Ormondroyd J. and Den Hartog J.P. (1928), "The theory of the dynamic vibration absorber", J. Appl. Mech. ASME, 50.
  20. Ricciardelli F. (1996), "Risposta delle torri di ponti di grande luce all'azione del vento" , Ph.D. thesis, Universita' di Napoli Federico II, Napoli, Italy.
  21. Samali B., Yang J.N., Yeh C.T. (1985), "Control of the lateral-torsional motion of wind-excited buildings", J. Engng, Mech. ASCE, 111, 777-796. https://doi.org/10.1061/(ASCE)0733-9399(1985)111:6(777)
  22. Sladek J.R. and Klinger RE. (1983), "Effect of tuned mass damper on seismic response", J. Struct. Engng. ASCE, 109, 2004-2009. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:8(2004)
  23. Snowdon J.C. (1959), "Steady-state behaviour of the dynamic absorber", J. Acoust. Soc. Amer., 31, 1096-1103. https://doi.org/10.1121/1.1907832
  24. Snowdon J.C. (1966), Vibration of cantilevers to which dynamic absorbers are attached", J. Acoust. Soc. Amer., 39, 878-886. https://doi.org/10.1121/1.1909966
  25. Solari G. (1994), "Gust excited-vibrations" Wind-excited Vibrations of Structures H. Sockel ed., Springer-Verlag.
  26. Srinivasan A.V. (1969), "Analysis of parallel damped dynamic vibration absorbers", J. of Engng. for Industry ASME, 91, 282-287. https://doi.org/10.1115/1.3591545
  27. Tsai H.C. and Lin G.C. (1993), "Optimum tuned-mass dampers for minimizing the steady-state response of support-excited and damped systems" , Earthquake Engng. Struct. Dyn., 22, 957-973. https://doi.org/10.1002/eqe.4290221104
  28. Vickery B.J. (1993), "Across-wind loading on reinforced concrete chimneys of circular cross-section" , BLWT-4-1993, The Boundary Layer Wind Tunnel Laboratory, Faculty of Engineering Science, The University of Western Ontario, London, Canada.
  29. Warburton G.B. and Ayorinde E.O. (1980), "Optimum absorber parameters for simple systems", Earthquake Engng. Struct. Dyn., 8, 197-217. https://doi.org/10.1002/eqe.4290080302
  30. Wirsching P.H. and Campbell G.W. (1974), "Minimal structural response under random excitation using the vibration absorber" , Earthquake Engng. Struct. Dyn., 2, 303-312.
  31. Xu Y.L., Kwok K.C.S. and Samali B. (1992a), "Control of wind-induced tall building vibration by tuned mass dampers," J. Wind Engng. Ind. Aero., 40, 1-32. https://doi.org/10.1016/0167-6105(92)90518-F
  32. Xu Y.L., Kwok K.C.S. and Samali B. (1992b), "The effect of tuned mass dampers and liquid dampers on cross-wind response of tall/slender structures" , J. Wind Engng. Ind. Aero., 40, 33-54. https://doi.org/10.1016/0167-6105(92)90519-G

피인용 문헌

  1. Research developments in vibration control of structures using passive tuned mass dampers vol.44, 2017, https://doi.org/10.1016/j.arcontrol.2017.09.015
  2. Development of semi-active hydraulic damper as active interaction control device to withstand external excitation vol.39, pp.1, 2014, https://doi.org/10.1007/s12046-013-0196-3
  3. Experimental parametric study on wind-induced vibration control of particle tuned mass damper on a benchmark high-rise building vol.26, pp.8, 2017, https://doi.org/10.1002/tal.1359
  4. Mathematical Model for Design of Mass Dampers for Wind Excited Structures vol.128, pp.9, 2002, https://doi.org/10.1061/(ASCE)0733-9399(2002)128:9(979)
  5. Semi-active Tuned Mass Damper control strategy for wind-excited structures vol.88, pp.1, 2000, https://doi.org/10.1016/S0167-6105(00)00024-6
  6. Passive and active mass damper control of the response of tall buildings to wind gustiness vol.25, pp.9, 2003, https://doi.org/10.1016/S0141-0296(03)00068-3
  7. On the amount of tuned mass to be added for the reduction of the shedding-induced response of chimneys vol.89, pp.14, 1999, https://doi.org/10.1016/s0167-6105(01)00156-8
  8. Coupled shear‐flexural model for dynamic analysis of fixed‐base tall buildings with tuned mass dampers vol.28, pp.17, 1999, https://doi.org/10.1002/tal.1671
  9. Coupled‐two‐beam discrete model for dynamic analysis of tall buildings with tuned mass dampers including soil–structure interaction vol.29, pp.1, 1999, https://doi.org/10.1002/tal.1683
  10. Unified Shear-Flexural Model for Vibration Control of Buildings Using Passive Dynamic Absorbers vol.2020, pp.None, 1999, https://doi.org/10.1155/2020/8810482
  11. Life-cycle-cost optimization for the wind load design of tall buildings equipped with TMDs vol.30, pp.4, 1999, https://doi.org/10.12989/was.2020.30.4.379