DOI QR코드

DOI QR Code

A finite strip method for elasto-plastic analysis of thin-walled structures under pure bending

  • Cheung, M.S. (Department of Civil Engineering, University of Ottawa) ;
  • Akhras, G. (Department of Civil Engineering, Royal Military College of Canada) ;
  • Li, W. (Department of Civil Engineering, Carleton University)
  • 발행 : 1999.09.25

초록

In the present study, the elasto-plastic analysis of prismatic plate structures subjected to pure bending is carried out using the finite strip method. The end cross-sections of the structure are assumed to remain plane during deformation, and the compatibility along corner lines is ensured by choosing proper displacement functions. The effects of both the initial geometrical imperfections and residual stresses due to fabrication are included in the combined geometrically and materially nonlinear simulation. The von-Mises yield criterion and the Prandtl-Reuss flow theory of plasticity are applied in modelling the elasto-plastic behavior of material. Newton-Raphson iterations are carried out as the rotation of the end cross sections of the structure is increased step by step. The parameter representing the overall axial strain of structure is adjusted constantly during the iteration process in order to eliminate the resulting overall axial force on any cross-section of the structure in correspondence with the assumption of zero axial force in pure bending. Several numerical examples are presented to validate the present method and to investigate the effects of some material and geometrical parameters.

키워드

참고문헌

  1. Cheung, M.S., Li, W. and Chidiac, S.E. (1996), Finite Strip Analysis of Bridges, E and FN SPON, London.
  2. Guo, Y.L. and Lindner, J. (1993), "Analysis of elastic-plastic interaction buckling of stiffened panels by spline finite strip method" , Computers and Structures, 46(3), 529-536. https://doi.org/10.1016/0045-7949(93)90222-Y
  3. Hancock, G.J. (1981), "Nonlinear analysis of thin sections in compression" , Journal of Structural Division, Proc. ASCE, 107(ST3), 455-471.
  4. Harding, J.E., Hobbs, R.E. and Neal, B.G. (1977), "The elasto-plastic analysis of imperfect square plates under in-plane loading" , Proc. Inst. Civil Engrs, Part 2, 63, 137-158. https://doi.org/10.1680/iicep.1977.3298
  5. Owen, D.R.J. and Hinton, E. (1980), Finite Element in Plasticity (Theory and Practice), Pineridge Press, Swansea.
  6. Sridharan, S. and Graves-Smith, T.R. (1981), "Postbuckling analyses with finite strips", Journal of Engineering Mechanics Division, Proc. ASCE, 107(EM5), 869-888.
  7. Zienkiewicz, O.C. (1977), The Finite Element Method, third edt., McGRAW-HILL, London.