The Resolving Method of Graft-Tunnel Mismatch in Arthroscopic ACL Reconstruction Using Bone-Patellar Tendon-Bone Graft

골-슬개건-골을 이용한 관절경적 전방십자인대 재건술시 이식물-터널 길이의 부조화를 줄이는 방법

  • Cho, Se-Hyun (Department of Orthopaedic Surgery, College of Medicine, Gyeong-Sang National University) ;
  • Park, Hyung-Bin (Department of Orthopaedic Surgery, College of Medicine, Gyeong-Sang National University) ;
  • Ha, Sung-Jin (Department of Orthopaedic Surgery, College of Medicine, Gyeong-Sang National University)
  • 조세현 (경상대학교 의과대학 정형외과학교실) ;
  • 박형빈 (경상대학교 의과대학 정형외과학교실) ;
  • 하성진 (경상대학교 의과대학 정형외과학교실)
  • Published : 1999.12.30

Abstract

Purpose : The purpose of this study is to prevent thc graft-tunnel mismatch by measuring the patellar tendon length, intertunnel distance, tibial tunnel length and by obtaining appropriate bone block length. Materials and Methods : Authors analyzed 15 patients who had taken the anterior cruciate ligament reconstruction from March 1997 to June 1999. Tibial guide was always set on the "endo" $40^{\circ}$ position(Acufex, MA, USA). We measured the following indices, intertunnel distance(X), tibial tunnel length(T), patellar tendon length(N), tibia bone plug length(Y). Both of the femoral tunnel length(F) and the patellar bone plug length(P) were made in 25mm. The appropriate tibial bone plug length was simply calculated by subtracting the patellar tendon length from the sum of the intertunnel distance and thc tibial tunnel length(Y=X+T-N). Results : The average indices were as follows ; the intertunnel distance(X) was $23.4{\pm}1.4mm$, the tibial tunnel length(T) was $43.6{\pm}1.7mm$, the patellar tendon length was $40{\pm}2.4mm$, and the tibia bone plug length was $27{\pm}2.4mm$. Conclusion : In authors' endoscopic technique, establishment of individually determined optimal tibial bone plug length, based on total tunnel length and patellar tendon length could prevent the problem of graft-tunnel mismatch.

목 적 : 각 환자의 슬개건 길이, 터널간 길이, 경골 터널 길이, 경골 골편의 길이를 측정하여 이식물과 터널 길이의 부조화를 예방하는 수기를 찾고자 하였다. 대상 및 방법 : 1997년 3월부터 1999년 6월까지 골-슬개건-골을 이용하여 전방십자인대 재건술을 시행 받았던 환자 15례를 대상으로 하였다. 수술시 Tibial Tunnel Guide의 각도는 $40^{\circ}$(Acufex, MA, USA)로 고정하였으며, 터널간 길이(X), 경골 터널 길이(T), 슬개건 길이(N), 경골 골편 길이(Y)를 측정하였다. 대퇴골 터널 길이(F)와 슬개골 골편 길이(P)는 공히 25mm로 일치시켰다. 터널 길이 부조화를 예방하기 위해 임의적으로 조절이 용이한 경골 골편의 길이는 경골 터널 길이와 터널간 길이를 합하여 슬개건 길이를 뺀 단순 공식(Y=X+T-N)으로 계산하였다. 결 과 : 대상환자에게 측정한 지표들의 평균값은 터널간 길이(X) $23.4{\pm}1.4mm$, 경골 터널 길이(T) $43.6{\pm}1.7mm$, 슬개건 길이(N) $40{\pm}2.4mm$, 경골 골편 길이(Y) $27{\pm}2.4mm$였다. 결 론 : 저자들의 방법은 터널의 총길이를 측정한 후 이식물의 총길이를 경골 골편 길이로 조정함으로써 경골터널 내에서의 이식물-터널 길이 부조화를 방지할 수 있었다.

Keywords