Journal of the Korean Society for Precision Engineering (한국정밀공학회지)
- Volume 16 Issue 3 Serial No. 96
- /
- Pages.164-173
- /
- 1999
- /
- 1225-9071(pISSN)
- /
- 2287-8769(eISSN)
Study on Robot Calibration Using Multi-measurement Coordinate System
다중 측정 좌표계를 이용한 로봇 캘리브레이션 방법 연구
Abstract
Robot calibration needs accurate measurements of robot end-effector position at a number of different robot configurations. One of the efficient ways of the measurement is "Touching on Jig" method suggested in [7], which utilizes a touch sensor and a fixture consisting of various sizes of blocks. By moving the end-effector to touch the surface of a block whose position relative to the other is known, the end-effector position relative to the fixture coordinate system can be obtained at the instant of touching. However, the global size of fixture is too small to cover the various configurations of the robot. Because of the manufacturing difficulties, the fixture cannot be manufactured large enough for well distributed position measurement. It results in the improvement of robot accuracy only in the limited space near to the fixture rather than over the whole space of the robot working volume. The paper proposes a method to resolve the above problem by measuring the end-effector positions with respect to several different coordinate system using the same measurement devices. It is found that the proposed method leads the improvements of robot position accuracy over the large space of working volume. The experimental studies are performed to show the validity of the method and their results are discussed.