한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)
- 제16권3호통권96호
- /
- Pages.47-52
- /
- 1999
- /
- 1225-9071(pISSN)
- /
- 2287-8769(eISSN)
A6060의 미소 드릴링시 절삭조건이 Burr 형성에 미치는 영향
Effect of Cutting Conditions on Burr Formation in Micro-drilling of A6061
- 발행 : 1999.03.01
초록
Theoretical and experimental studies on burr formation and deburring in many manufacturing processes have been actively pursued. Though micro-drilling has become more important in the production of precision parts such as PCB, air bearing, camera and nozzle, most studies on drilling burr formation have focused on the conventional drilling process. This paper describes burr formation process and the effect of cutting conditions such as spindle speed, feedrate and drilling depth per one step on burr formation in drilling A6061 with drills of diameter 1.0mm and 0.6mm. Experimental results showed that burr with cap were formed at relatively low feedrates, while petal burrs with several large burr fragments were formed at high feedrates. Burr height appeared to increase at the hight feedrates and lower spindle speeds. The effect of final cutting depth on burr height was negligible.