엔드밀 가공에서 2축 절사력 PI 제어를 통한 커터 런아웃 제거에 관한 연구

Cutter Runout Elimination in End Milling through Two-Axes PI Force Control

  • 노종호 (대전산업대학교 기계설계공학과 산업대학원) ;
  • 황준 (충주대학교 기계설계학과) ;
  • ;
  • 정의식 (대전산업대학교 기계설계공학과)
  • 발행 : 1999.01.01

초록

This paper presents the in-process runout compensation methodology to improve the surface quality of circular contouring cut in end milling process. The runout compensation system is based on the manipulation of workpiece position relative to cutter in minimizing the cutting force oscillation at spindle frequency. the basic concept of this approach is realized on a end milling machine whose machining table accommodates a set of orthogonal translators perpendicular to the spindle axis. The system performed that measuring the runout related cutting force component, formulating PI controlling commands, and the manipulating the workpiece position to counteract the variation of chip load during the circular contouring cut. To evaluate the runout compensation system performance, experimental study based on the implementation of two-axes PI force control is presented in the context of cutting force regulation and part surface finish improvement.

키워드