Tribology and Lubricants

  • 제15권3호
  • /
  • Pages.233-239
  • /
  • 1999
  • /
  • 2713-8011(pISSN)
  • /
  • 2713-802X(eISSN)
한국트라이볼로지학회 (Korean Tribology Society)
권호 표지
DOI QR코드

DOI QR Code

오일 이송을 고려한 다중 피스톤 링계의 피스톤 링 윤활 해석

Analysis of Ring Pack Lubrication Considering Oil Transport

  • 이재선 (서울대학교 정밀기계설계공동연구소) ;
  • 한동철 (서울대학교 기계항공공학부)
  • 발행 : 1999.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Generally quantity of supply oil for piston ring lubrication in an internal combustion engine may be insufficient to fill the entire volume formed in the clearance between piston ring and cylinder liner. Thus oil starvation condition should be considered for the analysis of piston ring lubrication. In order to reasonably estimate amount of oil left on the cylinder liner, adequate boundary condition should be adapted for the analysis of ring pack lubrication. In this analysis of ring pack lubrication of an internal combustion engine, oil starvation and open-end boundary conditions are considered at inlet and outlet of piston rings. It is revealed that piston rings are operated under oil starvation in most operating cycle and the result with these conditions are quite different from that with fully-flooded assumption.

키워드

참고문헌

  1. J. of Lubrication Technology, Trans. of ASME v.104 Piston ring lubrication-Part ⅠThe historical development of piston ring technology Economou, P. N.;Dowson, D.;Baker, A. J. S.
  2. Tribology International v.31 Analysis of the piston ring lubrication with a new boundary condition Han, D. C.;Lee, J. S.
  3. American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE Simulations, Controls and Lubrications Proceedings of the 1995, 17th Annual Fall Technical Conference of the ASME Internal Combustion Engine Division v.25 no.2 A Mixed Lubrication and Oil Transport Model for Piston Rings Using a Mass Conserving Algorithm Gulwadi, S. D.
  4. Z. Math. Phy. v.50 Zur hydrodynamiscien theorie der schmiermittehreibung Sommerfeld, A.
  5. Monatsbl. Berliner Bez. Ver. Dtsch. Ing. Vergleich der Ergebrusse der rectinerischen Behandling des Lagerschmieran-gsproblem mit neueren Veisuchsergebrussen Gmbel, L. K. R.
  6. J. of Inst. Civ. Eng. The stability of lubricating films in journal bearings Swift, H. W.
  7. Das Schwimmlager Steiber, W.
  8. Energy Conservation Through Fluid Film Lubrication Technology: Frontiers in Research and Design, Winter Annual Meeting of ASME Piston Ring Lubrication-Part Ⅱ Theoretical Analysis of a Single Ring and Complete Ring Pack Dowson, D.;Economou, P. N.;Ruddy, B. L.;Strachan, P. J.;Baker, A. J. S.
  9. J. of Lubrication Technology, Trans. of ASME Conditions for the rupture of a lubricating film. Part Ⅰ: Theoretical model Coyne, J. C.;Elrod, H. G.
  10. Proc. Instn. Mech. Engrs Implementation of an Algorithm to Model the Starved Lubrication of a Piston of Oil Flow and Onset of Gas Blow-By Ma, M-T.
  11. Proc. Instn Mech Engrs v.185 The contact of two nominally flat rough surfaces Greenwood, J. A.;Tripp, J. H.