Abstract
It is very important to analyze the capacity of basic freeway section in terms of planning, design, and operation of roads. Capacity, in Korean Highway Capacity Manual was Published in 1992, had been determined by data collected in only 4-lane freeway. But, Korea is continuously planning and constructing multi-lane roads for increasing traffic demand. For this reason, it is necessary to determine the capacity for multi-lane freeways. This study goals are two-fold the determination of lane capacity for 8-lane freeway; and the development of methodology determining total capacity using lane friction factor This study utilized the data collected by loop detectors at a station of FTMS in Kyungbu expressway. For determining capacities, this study analyzed maximum flow rate in various aspects such as collecting period, each lane, and total lane in one-way. In addition, this study evaluated the breakdown in traffic flow relations in order to find out interrelation of breakdown among lanes. Through this analysis, this study determined lane friction factors, critical speed, and critical density. Finally, this study expressed a new methodology of capacity analysis for multi-lane freeways using some findings from this analysis.
용량분석은 고속도로 기본구간 차로의 계획, 설계, 운영상태를 파악하기 위한 중요한 방법으로 사용되고 있다. 한국에서 사용되고 있는 도로용량편람에서 제시된 고속도로 기본구간에 대한 용량분석은 4차로만을 대상으로 수행된 결과라 할 수 있다. 그러나, 급증하는 교통수요에 대처하기 위한 다차로 고속도로의 계획, 건설이 잇따르고 있으며, 이러한 이유로 다차로 고속도로에 대한 용량분석 연구가 절실하다. 이러한 배경하에 본 연구는 8차로 고속도로에 대한 차로별 용량을 결정하였고 차로별 보정계수를 사용한 전체 차로 용량을 결정하는 방법론에 대해 연구하였다. 본 연구의 자료는 고속도로 교통관리시스템(FTMS)의 루프 검지기에서 수집된 자료를 이용하였고, 용량결정을 위하여 자료수집 단위 시간별, 차로별, 일방향 전체차로에 대해 최대 교통류율을 분석하였다. 또한, 차로별 교통류 불연속의 관계를 파악하기 위한 교통류관계를 분석하였다. 본 연구를 통해 차로별 보정계수, 임계속도, 임계밀도를 결정하였으며, 다차로 고속도로 용량분석의 새로운 방법을 제시하였다.