Abstract
Use of the ultra thick plate is being continuously increased in large off-shore structures, ships, bridges and skyscraper construction, due to increasingly large-sized steel structures and it seems that this trend will be maintained. But, occurrence of the lamella tearing has been reported in ultra thick plate used for construction. It is reportedly caused by impurities such S(sulfur), P(phosphorus) and others accumulated in the ultra thick plate's centerline in the thickness direction with strip shape or by restraint residual stress caused by the welding. In the ultra thick plate made by continuous casting method, occurrence of lamination is difficult to avoid because of the properties of production procedure. Therefore, with a view to reducing the lamella properties, this report tries tearing in the steel structure in the view of welding strength rather than metallic properties, this report tries to seek the optimum groove and welding procedure by using the computer simulation based on FEM(Finite Element Method).
강 구조물의 대형화에 기인하여 대형 해양구조물, 선박, 교량 및 고층 구조물에서의 극후판의 사용이 지속적으로 증가하고 있으며, 이런 경향은 앞으로도 계속될 것으로 생각된다. 그러나, 극후판을 사용하여 구조물을 시공할 때, 층상균열의 발생이 보고되고 있으며 이것은 극후판의 두께방향 중심부를 따라 분포하는 황, 인등의 불순 개재물 및 용접에 기인하여 발생하는 구속 잔류응력에 의하여 발생하는 것으로 알려져 있다. 연속 주조공법에 의하여 제조되는 극후판의 제조공정의 특성상, 층상균열의 발생은 회피하기가 현실적으로 어려우며, 따라서, 본 논문에서는 강구조물의 층상균열 발생의 감소 방안으로서, 금속학적 측면보다는 용접강도 측면에서 유한요소법에 기초한 전산 프로그램을 사용하여 최적 개선부형상 및 용접순서를 선정하고자 한다.