DOI QR코드

DOI QR Code

A Study for Numerical Procedure of Strengthening Capacity in Field Structure

사용중 보강되는 부재의 보강설계법 연구

  • Published : 1999.06.01

Abstract

Recently, many strengthening methods are developed to repair damaged structures, especially, steel plate or carbon fiber sheet bonding methods are widely used. For the bonding methods, the strengthening materials are bonded when the original structure is under loading, with causes the difference of initial stresses between original member and bonded material. However, current design method or theory, which mostly depends on ultimately strength design, cannot account the difference of initial stresses between members, and it disregards the reduction of nominal strength. In this study, a new strengthening design theory and program which can account the difference of initial stresses are developed, and applied to the case when a structure in service is repaired. In order to verify the validity of the theory and the program, a test result is referred and compare with the results and it is showed that the calculated values are almost same as the referred data and finally proved that the program is reliable. The results showed that the amount of strengthening material depends on the status of damages of structure, and the nominal strength is reduced depending on the degree of damages.

Keywords

References

  1. Journal of Structural Engineering, ASCE v.116 no.4 Premature Failure of Externally Plated Reinforced Concrete Beams Deric John Oehlers;John Paul Moran
  2. The Structural Engineering v.65A no.2 Structural Behavior of Reinforced Concrete Beams Strengthened by Epoxy-Eonded Steel Plates R. N. Swamy;R. Johns; J. W. Bloxham
  3. ACI Journal v.52 no.4 Concrete stress Distribution in Ultimate Strength Design Eivind Hognestad;Norman, W. Hanson
  4. Proceeding. ASCE v.101 no.DT3 Nonlinear Analysis of RC Shells of General Form Scordelis Alexander C.;Lin, C. S.
  5. ACI Journal v.57 no.6 Advanced Strength and Applied elastivity Ansel C.;Ugural Saul, K.;Fenster
  6. The Structural Engineering v.73 no.12 Structural Behavior of Externally bonded Steel Plated RC Brams after Long-Term exposure Swamy, R. N.;B. Hobbs;M. Roberts
  7. 한국 콘크리트학회 1997년도 봄 학술발표회 논문집 보수 보강재료의 공법개발연구 송병표;한만엽;황의승;홍영균
  8. 한국 콘크리트 학회지 v.10 no.3 보강재의 변형부착에 따른 보의 구조적 거동 송병표;한만엽