초록
본 논문에서는 교류전압 인가시 모의 GIS내에 존재하는 금속이물의 거동현상에 대해 연구하였다. 평행평판 전극을 내장한 가스챔버를 설계·제작하고, 전국내 선형 및 구형의 금속이물에 대해 부상전압을 계산 및 측정하였다. 또한 각각의 금속이물에 대전되는 전하량을 계산하였다. 고속카메라를 이용하여 금속이물의 종류 및 인가전압에 따른 거동양상과 부상시간, 부상높이 등의 거동특성을 분석하였다. 전계인가시 금속이물의 대전 전하량은 금속이물의 크기에 따라 증가하며, 부상전압은 서형 및 구형 금속이물의 직경에 큰 양형을 받는 것으로 나타났다. 금속이물의 부상이후 부상전압 부근의 전압에서의 선형 금속이물은 후 전극과 거의 수직인 상태로 상하 왕복운동을 하며, 거의 수직상태로 움직이는 거동 형태를 나타내었다. 절연파괴전압에 가까운 전압에서는 금속이물은 부상 중에 수회 수직회전을 반복하며, 장시간 부유하였다.
This paper describes the rmtion characteristics of a particle in GIS under AC voltage. To measure the motion characteristics of the particle, a model gas chamber and parallel plain electrodes were designed and manufactured lift-off voltages of wire and spherical particles on the electrode were calculated and rreasured, and electric charge was calculated. By using a high speed carrera, the rmtion characteristics of various particles with aw}ied voltages, such as motion pattern, lift-off time, lift-off height, were analyzed 1be lift-off voltages were greatly affected by diarreters of wire and spherical particles. At voltage around lift-off voltage, the stand-up particle in vertical state rmved up and down between electrodes and the height of the lift-off particle was low. At voltage around breakdown voltage, the particle repeated vertical rotation a few times while they were being lifted off, and then, they were floating between the electrodes.trodes.