Abstract
In this study, mixing and dilution characteristics of vertical multijet discharged by multiport diffuser into stagnant water are investigated. The results obtained from the experiment of multiport diffuser performed in the three dimensional flume are as follows. As far as merging process of multiport diffuser is concerned, merging starts at about z/l = 3 although merging length is dependent upon stability condition and thereafter lateral temperature distribution becomes gradually uniform which is typical distribution of plane jet. Analyses of experimental data for minimum dilution show that characteristics of minimum dilution are described based on three regions which are jet region where momentum is dominated, intermediate region, and plume region where buoyancy is dominated. Minimum dilution coefficient in plume region of multiport diffuser obtained in this study is 15% higher than that of plane diffuser. This is because individual jet of multiport diffuser entrains more ambient water before merging is occurred, and therefore dilution increases.
본 연구에서는 정지수체에서 다공확산관을 통해 방류된 연직다중의 혼합 및 희석 특성에 대해 규명하였다. 3차원 실험수조에서 실험을 통해 밝혀진 결과는 다음과 같다. 우선 다공확산관의 병합과정을 살펴보면 흐름의 안정조건에 따라 병합거리가 다소 차이가 있기는 하지만 {{{{ { z}_{ } }}}}/{{{{ {l}_{ } }}}}가 대략 3인 지점부터 병합이 시작되어 그 이후에는 평면부력?의 거동에 서서히 가까워짐을 알 수 있다. 최소희석률에 대해 분석해 본 결과, 방류운동량이 지배적인 영역, 천이영역, 그리고 부력이 지배적인 부력류영역으로 나누어 희석률 특성을 표현할 수 있음을 알 수 있었다. 본 연구의 실험결과 다공확산관의 경우 부력류영역의 희석률 상수가 평면확산관에 비해 15% 더 높게 나왔다. 그 이유는 다공확산관의 경우 병합 이전에는 개별의 경계면에서 주변수의 포획이 발생하여 희석이 증대되기 때문이다.