Experimental Study on the Parameters Affect Cylindrical Cup Drawing Process

원형컵 드로잉 공정에 미치는 영향인지에 관한 실험적 연구

  • Published : 1999.10.01

Abstract

Sheet metal forming process is a non-linearity problem which is affected by various process variables, such as geometric shape of punch and die, frictional characteristic, etc.. Therefore, the knowledge of the influence of the process variables is needed in the design of sheet metal working processes. In this paper, cylindrical cup drawing tests for blank holding force, punch speed and lubrication between sheet material and tool were carried out to investigate the influence upon sheet formability. Experimental results were discussed about the defects on the deformation behaviors during the forming process.

Keywords

References

  1. 박판금속의 성형 전기찬
  2. 대한기계학회 논문집 v.14 no.6 자동차용 표면 처리 강판의 마찰 특성에 관한 연구 김영석;최원집
  3. 한국소성가공학회지 v.7 no.5 스테인리스 판재의 성형성 향상에 관한 연구 배원병;허병우;김호윤;한정영
  4. Trans, ASME, J. of Engineering for industry v.112 Deep drawing with blank holder force approximately proportional to the punch force S.Thiruvarudchelvan;W.G.Lewis
  5. Proc. Instn. Mech. Eng. v.210 Frictional behaviour of lubricants during deep drawing and ironing processes for zine-coated steel sheets M.Muraki;T.Nakamura
  6. J. Mat. Pro. Tech. v.63 Influence of lubricant on limitation of formability of cylindrical cup drawing Y.M.Huang;J.W.Cheng
  7. Handbook of Metal Forming K.Lange
  8. 소성학 김동원
  9. Int. J. Mech. Sci. v.27 no.7/8 A formulation for rigid-plastic finite element method considering work-hardening effect Y.J.Kim;D.Y.Yang